THE INFLUENCE OF MATERIAL PROPERTIES ON THE Q-STRESS VALUE NEAR THE CRACK TIP FOR ELASTIC-PLASTIC MATERIALS

Margin Graba

首页> 外文期刊>Journal of Theoretical and Applied Mechanics >THE INFLUENCE OF MATERIAL PROPERTIES ON THE Q-STRESS VALUE NEAR THE CRACK TIP FOR ELASTIC-PLASTIC MATERIALS

【24h】

THE INFLUENCE OF MATERIAL PROPERTIES ON THE Q-STRESS VALUE NEAR THE CRACK TIP FOR ELASTIC-PLASTIC MATERIALS

机译：材料性能对弹塑性材料裂纹尖端附近Q应力值的影响

获取原文

获取原文并翻译 | 示例

掌桥外文数据库（机构版） >>

开具论文收录证明 >>

文献代查 >>

页面导航

摘要
著录项
相似文献
相关主题

摘要

In the paper, the values of the Q-stress determined for various elastic-plastic materials for single edge notched specimens in bending (SEN(B)) are presented. The influence of the yield strength, the work-hardening exponent and the crack length on the Q-p

机译：在本文中，介绍了为弯曲的单边带缺口试样的各种弹塑性材料确定的Q应力值（SEN（B））。屈服强度，加工硬化指数和裂纹长度对Q-p的影响

著录项

来源
《Journal of Theoretical and Applied Mechanics》 |2008年第2期|p.269-289|共21页
作者
Margin Graba;
展开▼
作者单位

Kielce University of Technology, Faculty of Mechatronics and Machine Design, Kielce, Poland;

展开▼
收录信息
原文格式 PDF
正文语种 eng
中图分类力学;
关键词
Q-stres; J-Q theory; fracture mechanics;

机译：Q-stres;J-Q理论;断裂力学;

相似文献

外文文献
中文文献
专利

1. THE INFLUENCE OF MATERIAL PROPERTIES AND CRACK LENGTH ON THE Q-STRESS VALUE NEAR THE CRACK TIP FOR ELASTIC-PLASTIC MATERIALS FOR CENTRALLY CRACKED PLATE IN TENSION [J] . Marcin Graba Journal of Theoretical and Applied Mechanics . 2012,第1期

机译：材料性能和裂纹长度对集中裂纹板弹塑性材料裂纹尖端附近Q应力值的影响
2. Influence of cracking on the diffusion properties of cement-based materials Part I: Influence of continuous cracks on the steady-state regime [J] . B.Gerard, J.Marchand Cement and Concrete Research . 2000,第1期

机译：裂纹对水泥基材料扩散性能的影响第一部分：连续裂纹对稳态的影响
3. Calculations for Crack Growth Rate in Whole Process Realized with the Single Stress-Strain-Parameter Method for Elastic-Plastic Materials Contained Crack [J] . 1 YanguiYu Journal of Materials Sciences and Applications . 2015,第3期

机译：用单应力-应变参数法计算含裂纹的弹塑性材料全过程的裂纹扩展速率
4. INFLUENCE OF A BIMATERIAL INTERFACE ON THE CRACK DRIVING FORCE IN ELASTIC AND ELASTIC-PLASTIC MATERIALS [C] . N. K. Simha, G.X. Shan, O. Kolednik, Symposium on Modelling the Performance of Engineering Structural Materials III, Oct 7-10, 2002, Columbus, Ohio, USA . 2002

机译：生物界面对弹性和弹塑性材料中裂纹驱动力的影响
5. Influence of Material Properties and Fracture Properties on the Crack Nucleation and Growth [D] . Zeng, Bo. 2021

机译：材料性质和裂缝性能对裂纹成核和生长的影响
6. Quantifying the Mechanical Properties of Materials and the Process of Elastic-Plastic Deformation under External Stress on Material [O] . Jan Valíček, Marta Harničárová, Andreas Öchsner, 2015

机译：量化材料的机械性能以及材料在外力作用下的弹塑性变形过程
7. Mixed-mode (I/II) crack initiation direction for elastic-plastic materials based on crack-tip plastic zone [O] . CM Sharanaprabhu, SK Kudari 2011

机译：基于裂纹尖塑区的弹性塑料材料的混合模式（I / II）裂纹启动方向
8. Development of Methods for Predicting Large Crack Growth in Elastic-Plastic Work-Hardening Materials in Fully Plastic Conditions [R] . Ford, H., Turner, C. E., Fenner, R. T., 1995

机译：全塑性条件下弹塑性加工硬化材料大裂纹扩展预测方法的研究进展

THE INFLUENCE OF MATERIAL PROPERTIES ON THE Q-STRESS VALUE NEAR THE CRACK TIP FOR ELASTIC-PLASTIC MATERIALS

摘要

著录项

相似文献

相关主题

期刊订阅