首页> 外文期刊>Journal of structural geology >Quantification of neotectonic stress orientations and magnitudes from field observations in Finnmark, northern Norway
【24h】

Quantification of neotectonic stress orientations and magnitudes from field observations in Finnmark, northern Norway

机译:挪威北部芬马克地区野外观测对新构造应力方向和强度的量化

获取原文
获取原文并翻译 | 示例
       

摘要

Fieldwork was conducted in Finnmark, northern Norway, with the purpose of detecting and measuring stress-relief features, induced by quarrying and road works, and to derive from them valuable information on the shallow-crustal stress orientations and magnitudes. Two kinds of stress-relief features were considered in this study. The first consists of drillhole offsets that were found along blasted road-cuts and which were triggered by the sudden rock unloading following the actual blasting. Vertical axial fractures found in the concave remains of boreholes represent the second kind of stress-relief feature. The axial fractures are tension fractures produced by gas overpressure inside the drillhole when the blast occurs. As such, their strike reflects the orientation of the ambient maximum horizontal stress axis. The borehole offsets show mostly reverse-slip displacements to the E-SE and the axial fractures trend NW-SE on average, in agreement with NW-SE compression induced by North Atlantic ridge-push forces. Mechanical considerations of the slip planes offsetting some of the drillholes lead to the conclusion that the magnitude of the maximum horizontal stress at the surface is in the range ~0.1-~1 MPa. This range of magnitudes is 1-2 orders less than the horizontal stress magnitudes measured at the surface in other post-glacial environments (e.g. Canada). It is suggested that this difference is related to the marked decline in stress that followed the tremendous post-glacial burst of earthquake activity that affected Fennoscandia but apparently not the Canadian Shield.
机译:实地调查是在挪威北部的芬马克(Finnmark)进行的,目的是检测和测量采石场和道路工程引起的应力释放特征,并从中获得有关浅壳应力方向和强度的有价值的信息。本研究考虑了两种缓解压力的功能。第一个是沿着爆破的路cut发现的钻孔偏移,它是由实际爆破后突然卸载岩石触发的。在钻孔的凹形残余物中发现的垂直轴向裂缝代表了第二种应力释放特征。轴向裂缝是爆炸发生时由钻孔内部的气体超压产生的拉伸裂缝。这样,它们的撞击反映了周围最大水平应力轴的方向。与北大西洋海脊推力引起的NW-SE压缩相一致,井眼偏移大多显示出向E-SE的反向滑动位移,平均轴向裂缝趋势为NW-SE。滑移平面偏移一些钻孔的机械考虑导致得出这样的结论,即表面上的最大水平应力的大小在〜0.​​1-〜1 MPa的范围内。该幅度范围比在其他冰期后环境(例如加拿大)在表面测得的水平应力幅度小1-2个数量级。有人认为,这种差异与冰川活动后的巨大地震爆发后的应力显着下降有关,该地震影响了芬诺斯堪的亚,但显然不影响加拿大盾。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号