Determination of the stress conditions of the ductile-to-brittle regime along the Asuke Shear Zone, SW Japan

摘要

The stress conditions of the ductile-to-brittle regime have been assessed along the Asuke Shear Zone (ASZ), which strikes NE-SW in the Cretaceous Ryoke granite terrain in SW Japan. Along the ASZ, pseudotachylyte and mylonitized pseudotachylyte are locally developed together with cataclasite. The simultaneous operation of dislocation creep and grain-size-sensitive creep, as indicated by the coexistence of the Z-maximum and relatively random c-axis lattice preferred orientations as well as the sizes of dynamically recrystallized quartz grains (6.40-7.79 mu m) in the mylonitized pseudotachylyte, suggest differential stresses of 110-130 MPa at similar to 300 degrees C. The e-twin morphology, twinning ratio, and distribution of the glide direction on the e-twin plane of the twinned calcite in the amygdules of the pseudotachylyte suggest the stress conditions of the sigma(1) and sigma(3) axes trend 228 degrees and 320 degrees and plunge 55 degrees and 1 degrees, respectively, and indicate differential stresses of 40-80 MPa at 150-200 degrees C. Based on kinematic indicators in the fault rocks, the stress conditions estimated from calcite twins, and the cooling history of the granitic protolith, the ASZ is inferred to have been activated under a stress state that caused sinistral normal movements before and after pseudotachylyte formation at 70-50 Ma. (C) 2016 Elsevier Ltd. All rights reserved.