Seismic Collapse Safety of Reinforced Concrete Buildings. I: Assessment of Ductile Moment Frames

摘要

This study applies nonlinear dynamic analyses to assess the risk of collapse of RC special moment-frame (SMF) buildings to quantify the seismic safety implied by modern building codes. Thirty archetypical RC SMF buildings, ranging in height from 1 to 20 stories, are designed according to ASCE 7-02 and ACI318-05 for a high-seismic region. The results of performance-based seismic assessments show that, on average, these buildings have an 11% probability of collapse under ground motion intensities with a 2% probability of exceedance in 50 years. The average mean annual rate of collapse of 3.1 × 10~(-4) collapses per year corresponds to an average of 1.5% probability of collapse in 50 years. The study further examines the influence of specific design provisions on collapse safety. In particular, changes to the minimum seismic base shear requirement between 2002 and 2005 editions of ASCE 7 and variations in ACI 318 strong-column weak-beam (SCWB) design requirements are investigated. The study finds that the reduction in the minimum base shear, introduced in ASCE 7-05 and subsequently rescinded, dramatically increases the collapse risk of tall (long-period) frame buildings in high-seismic regions. An investigation of the SCWB requirements shows that the current ACI 318 provisions delay, but do not prevent, column yielding and the formation of story collapse mechanisms. An increase in the SCWB ratio above 6/5 (1.2) does not significantly improve performance of low-rise frame buildings but may reduce collapse risk for midrise and taller buildings. This study of modern RC buildings is contrasted with the collapse safety of older (nonductile) RC moment-frame buildings in the companion paper.