首页> 外文期刊>Journal of Polymers and the Environment >Degradation Study of Biobased Polyester-Polyurethane and its Nanocomposite Under Natural Soil Burial, UV Radiation and Hydrolytic-Salt Water Circumstances
【24h】

Degradation Study of Biobased Polyester-Polyurethane and its Nanocomposite Under Natural Soil Burial, UV Radiation and Hydrolytic-Salt Water Circumstances

机译:自然土掩埋,紫外线辐射和水解盐水作用下生物基聚酯-聚氨酯及其纳米复合材料的降解研究

获取原文
获取原文并翻译 | 示例
       

摘要

The current study focuses on the development of a formulation of polyester polyurethane (PEPU) samples using castor oil (CO) modified polyester polyol and partially biobased aliphatic isocyanate. The CO modified polyester polyol was synthesized employing transesterification reaction between CO and diethylene glycol in the presence litharge (PbO) catalyst. Subsequently, the modification of CO was confirmed using proton nuclear magnetic resonance ((HNMR)-H-1) spectra analysis. In the next stage, the biobased polyester polyurethane nanocomposites (PEPUNC) were prepared by incorporating 3 wt% OMMT nanoclay within PEPU through in situ polymerization technique. The produced PEPU was confirmed by Fourier transform infrared spectroscopy (FTIR) and (HNMR)-H-1 spectra analysis. Further, the degradation properties of developed PEPU subjected to soil-burial, UV exposure and hydrolytic-salt water medium were noted by FTIR spectroscopy. Corresponding weight loss, mechanical measurements and morphological studies through scanning electron microscopy (SEM) analysis were studied. The results showed that the addition of OMMT nanoclay within the PEPU matrix produces significant improvement in the degradation rate which indicated the susceptibility of OMMT nanoclay to humidity upon exposure to soil burial. The produced microorganisms from the soil resulted in significant chemical and morphological changes in the entire structure of the PEPU. Additionally, the highest degradation and percentage of weight loss was observed under soil burial as compared to UV exposure and hydrolytic-salt water medium.
机译:当前的研究重点是使用蓖麻油(CO)改性的聚酯多元醇和部分生物基脂族异氰酸酯开发聚酯聚氨酯(PEPU)样品配方。在改性锂(PbO)催化剂存在下,利用CO和二甘醇之间的酯交换反应合成了CO改性聚酯多元醇。随后,使用质子核磁共振((HNMR)-H-1)光谱分析确认了CO的修饰。在下一阶段,通过原位聚合技术将3 wt%OMMT纳米粘土掺入PEPU中,从而制备生物基聚酯聚氨酯纳米复合材料(PEPUNC)。通过傅立叶变换红外光谱(FTIR)和(HNMR)-H-1光谱分析来确认所产生的PEPU。此外,通过红外光谱(FTIR)观察到已开发的PEPU在土壤掩埋,紫外线照射和水解盐水介质作用下的降解性能。通过扫描电子显微镜(SEM)分析了相应的失重,机械测量和形态学研究。结果表明,在PEPU基体中添加OMMT纳米粘土可显着提高降解速率,这表明OMMT纳米粘土在暴露于土壤掩埋物后对湿度的敏感性。从土壤中产生的微生物导致PEPU整个结构发生了重大的化学和形态变化。此外,与紫外线暴露和水解盐水介质相比,在土壤掩埋下观察到最高的降解率和重量减轻百分比。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号