...
首页> 外文期刊>Journal of Polymers and the Environment >Characterization of Rigid Composite Polyester Foams Derived from Biomass
【24h】

Characterization of Rigid Composite Polyester Foams Derived from Biomass

机译:生物质衍生刚性复合聚酯泡沫的特征

获取原文
获取原文并翻译 | 示例

摘要

The building industry is under increasing pressure to develop and use sustainable approaches and materials. Replacing products from crude oil by co-products from bio-refinery processing can have both positive economic and environmental features. Crude glycerol, the main co-product from biodiesel production, is produced in large quantity, but have few applications. Crude glycerol has potential to substitute pure glycerol in some of its applications, as for the synthesis of polymers. Polymeric foams are materials used in building industry for insulation purpose but are mainly petroleum-based. Cellulose filaments are materials derived from biomass which could be used as fillers to modify the properties of a polymer. In this study, rigid composite polyester foams from crude glycerol with cellulose filaments has been developed to be used as thermal insulators for building industry. The samples have been characterized at different polymerization stages and at different conditioning cycles. FTIR analysis confirmed that the final polymerization created new ester bonds between glycerol and citric acid, which it was supported by the increase of T-g. The compressive strength values were higher after final polymerization but were affected negatively at high humidity. The use of crude glycerol resulted to a more homogenous pore structure and higher porosity than pure glycerol. Again, thermal conductivity and stability tests showed that crude glycerol foams were more reliable than pure glycerol ones for their thermal properties. Then, the crude glycerol foams absorbed more water and had lower density than pure glycerol specimens. At last, the adding of cellulose filaments enhanced the stability of volumetric swelling by comparison with glass fibers. Overall, from the specific conditions and methods used in this study the crude glycerol could replace pure glycerol for development of polymer, and the cellulose filaments were better fillers than common ones, such as glass fibers.
机译:建筑业正在增加压力,以发展和使用可持续的方法和材料。通过生物炼油厂加工的共同产品取代原油的产品可以具有积极的经济和环境特征。粗甘油是生物柴油生产的主要共同产品,大量生产,但应用少量。粗甘油具有替代其在其一些应用中的纯甘油,如聚合物的合成。聚合物泡沫是用于绝缘目的的建筑业的材料,但主要是基于石油的。纤维素丝是衍生自生物质的材料,其可用作改变聚合物的性质的填料。在本研究中,已经开发出来自粗甘油的刚性甘油的刚性复合聚酯泡沫,以用作建筑业的热绝缘体。样品已经在不同的聚合阶段和不同调理循环中表征。 FTIR分析证实,最终聚合在甘油和柠檬酸之间产生了新的酯键,其通过T-g的增加来支持。在最终聚合后,压缩强度值较高,但在高湿度下受到负面影响。粗甘油的使用导致更均匀的孔结构和比纯甘油更高的孔隙率。同样,导热率和稳定性试验表明,粗甘油泡沫比纯甘油泡沫更可靠,用于其热性质。然后,粗甘油泡沫吸收更多的水,密度低于纯甘油标本。最后,通过与玻璃纤维的比较,添加纤维素长丝的添加增强了体积溶胀的稳定性。总体而言,从本研究中使用的具体条件和方法来说,粗甘油可以代替纯甘油以进行聚合物的发育,并且纤维素长丝比常见的填充剂,例如玻璃纤维。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号