...
首页> 外文期刊>Journal of Membrane Science >Effects of carbon dioxide-induced plasticization on the gas transport properties of glassy polyimide membranes
【24h】

Effects of carbon dioxide-induced plasticization on the gas transport properties of glassy polyimide membranes

机译:二氧化碳诱导的增塑对玻璃状聚酰亚胺膜气体传输性能的影响

获取原文
获取原文并翻译 | 示例

摘要

The time dependence of carbon dioxide (CO_2) transport properties, such as permeability, solubility, and diffusivity, in glassy polyimide membranes was investigated in terms of membrane preparation protocols (i.e., casting solvent and thermal treatment). The polyimide used was 6FDA-TeMPD (4,4-(hexafluoroisopropylidene) diphthalic anhydride) (6FDA)-2,3,5,6-tetramethyl-1,4-phenylene-diamine (TeMPD). The time dependence of CO_2 permeability in the as-cast 6FDA-TeMPD membranes prepared from tetrahydrofuran and dichloromethane showed typical CO_2-induced plasticization at pressures over 10 atm. The critical plasticization pressure at which CO_2-induced plasticization begins to affect the gas permeability shifted from nearly 10-30 atm after heat treatment. The increase in CO_2 permeability upon plasticization is mostly caused by an increase in CO_2 diffusivity. Furthermore, we found that regardless of the membrane preparation protocol, there is a critical CO_2 diffusivity of73 ± 5 x 10~(-8) cm~2/s at the plasticization pressure in 6FDA-TeMPD membranes.
机译:根据膜制备方案(即浇铸溶剂和热处理)研究了玻璃状聚酰亚胺膜中二氧化碳(CO_2)传输性质的时间依赖性,例如渗透性,溶解性和扩散性。所用的聚酰亚胺是6FDA-TeMPD(4,4-(六氟异亚丙基)二邻苯二甲酸酐)(6FDA)-2,3,5,6-四甲基-1,4-亚苯基二胺(TeMPD)。由四氢呋喃和二氯甲烷制备的铸态6FDA-TeMPD膜中CO_2渗透性的时间依赖性显示在超过10atm的压力下典型的CO_2诱导的增塑作用。热处理后,CO_2诱导的塑化开始影响气体渗透率的临界塑化压力从近10atm移到了30atm。塑化时CO_2渗透性的增加主要是由CO_2扩散性的增加引起的。此外,我们发现,不管膜制备方案如何,在6FDA-TeMPD膜的增塑压力下,临界CO_2扩散率为73±5 x 10〜(-8)cm〜2 / s。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号