...
首页> 外文期刊>Journal of Materials Research >Growth and properties of KBe2BO3F2 crystal
【24h】

Growth and properties of KBe2BO3F2 crystal

机译:KBe2BO3F2晶体的生长和性能

获取原文
获取原文并翻译 | 示例

摘要

Single crystals of KBeBO3F (KBBF) up to 2 mm in thickness were grown by using a spontaneous nucleation method. The flux was composed of KF and B2O3, and the optimal ratio for growing KBBF single crystal thicker than 1 mm is suggested to be (1.0-1.5):(5.0):(0.7-1.2) (KBBF:KF:B2O3) in molar ratio. The ideal morphology of KBBF is two sets of tabular facets and a set of rhombic facets. Surface morphology was characterized both by optical microscopy and atomic force microscopy. Transmission spectra showed that high transmission was maintained up to 170 nm. Based on refractive index measurements, phase matching curves for types I and II were determined. Using a prism coupling method, the effective fourth harmonic generation for an Nd:YAB laser was realized in an 0.6-mm-thick KBBF sample. The output energy of the 266-nm beam was 0.282 mJ, and the conversion efficiency was 11.8%. A 183.6-nm laser over 1 mW was obtained from a Ti:sapphire second harmonic generation beam in an 0.8-mm KBBF sample. The conversion efficiency reached 2.3%. A 179.4-nm laser was also observed from a 358.7-nm laser by directly frequency doubling. This is the shortest wavelength obtained through nonlinear optical processes in a solid-state laser. [References: 15]
机译:通过使用自发成核方法,可以生长厚度达2 mm的KBeBO3F(KBBF)单晶。助熔剂由KF和B2O3组成,建议生长大于1 mm的KBBF单晶的最佳摩尔比为(1.0-1.5):( 5.0):( 0.7-1.2)(KBBF:KF:B2O3)比。 KBBF的理想形态是两组表格小平面和一组​​菱形小平面。通过光学显微镜和原子力显微镜对表面形态进行表征。透射光谱显示高透射率维持到170 nm。基于折射率测量,确定了类型I和II的相位匹配曲线。使用棱镜耦合方法,可以在0.6mm厚的KBBF样品中实现Nd:YAB激光器的有效四次谐波生成。 266 nm光束的输出能量为0.282 mJ,转换效率为11.8%。从0.8毫米KBBF样品中的钛:蓝宝石二次谐波产生光束获得了超过1毫瓦的183.6纳米激光。转化效率达到2.3%。还通过直接倍频从358.7 nm激光器中观察到179.4 nm激光器。这是通过固态激光器中的非线性光学过程获得的最短波长。 [参考:15]

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号