机译:用气体将V型铝板成型为马鞍形轮廓的槽
Department of Mechanical Engineering, National Central University, Jhong-li, Taiwan;
Department of Mechanical Engineering, National Central University, Jhong-li, Taiwan;
Department of Electrical Engineering, Chung Gung University, Tao-yuan, Taiwan;
Department of Materials Science and Engineering, National Dong Hwa University, Hualien, Taiwan;
Department of Materials and Optoelectronic Science, National Sun Yat-Sen University, Kaohsiung, Taiwan;
National Nano Device Laboratory, Hsinchu, Taiwan;
camel-back; saddle-contour; SP5083; superplastic; twin humps; V-shape;
机译:气体将V型铝板成型为马鞍形轮廓槽
机译:V形铝板的两阶段超塑性成形为具有深且不规则轮廓的槽
机译:先前的板屈曲导致在形成波浪形底部的V形槽的气体中形成褶皱
机译:气体将V形铝板形成为带有轮廓的槽,如双驼峰 - 骆驼的背面
机译:铝板成形中的胶结的调查。
机译:原位扫描电子显微镜观察铝合金薄板上蒸汽涂层形成的氢氧化物膜的裂纹萌生和扩展
机译:铝合金板材的塑性各向异性和可成形性。物质表面条件对抗压力成形各种铝合金板圆柱深拉伸性的影响。
机译:Fs-1h镁合金板的板材抗压强度和镁合金和铝合金形成截面的最大强度公式