Flexible fabrication of optical glass micro-lens array by using contactless hot embossing process

摘要

This paper reported the fabrication of optical glass micro-lens array (MLA) by using contactless micro-embossing technology. Firstly, the micro-hole array in the tungsten carbide (WC) substrate was made by the micro-electrical discharge machining (micro-EDM). Then, to improve the oxidation resistance, anti-sticking properties and chemical inertness of mold surface, Cr-W-N coating was deposited on the mold insert by plasma-enhanced sputtering technique. Finally, controllable MLA were fabricated with the coated EDM-mold by using the precision glass molding machine from Shenzhen University (SZU's PGMM30). The surface roughness, three-dimensional morphology and optical performance of glass MLA were measured by ContourGT-X 3D optical profiler, ultraviolet spectrophotometer, and optical imaging system, respectively. The experimental results indicated that the contactless hot embossing process has the capability of fabricating high-quality and mull-scale glass MLA. This work provides an effective method for the fabrication of optical glass MLA.