首页> 外文期刊>Journal of Lightwave Technology >High-bandwidth graded-index polymer optical fiber enabling power penalty-free gigabit data transmission
【24h】

High-bandwidth graded-index polymer optical fiber enabling power penalty-free gigabit data transmission

机译:高带宽渐变折射率聚合物光纤可实现无功耗的千兆数据传输

获取原文
获取原文并翻译 | 示例
       

摘要

A relation between the -3 dB bandwidths of graded-index plastic optical fibers (GI POFs) and the total power penalty of 50-m GI POF links is investigated in detail. The bandwidth of the GI POF is deliberately varied by controlling the index profile. It is theoretically and experimentally confirmed that sufficiently high bandwidth on the order of gigahertz is necessary for the GI POF, even for several hundreds of megabit per second (Mb/s) data rate, in order to achieve the power penalty free in the bit error rate performance of the link. In the case of silica-based multimode fiber links, it has been reported that the launch condition strongly affects the bit error rate performances; hence, a special launching technology for the silica-based multimode fiber is developed to achieve a 1-Gb/s transmission in the gigabit Ethernet protocol. In this paper, it is also found that the power penalty-free state is realized in the GI POF link, which is independent of the launch condition, when a GI POF with a nearly ideal index profile is used. The GI POF is a promising physical layer for realizing stable, high-speed and low-cost data-com networks.
机译:详细研究了渐变折射率塑料光纤(GI POF)的-3 dB带宽与50米GI POF链路的总功率损失之间的关系。 GI POF的带宽是通过控制索引配置文件故意改变的。从理论上和实验上都证实,GI POF甚至需要几百兆比特(Mb / s)的数据速率,对于GI POF来说,足够高的带宽是必需的,以便实现无误码的功率损失评价链接的性能。据报道,在基于二氧化硅的多模光纤链路中,发射条件严重影响了误码率性能;因此,针对基于二氧化硅的多模光纤开发了一种特殊的发射技术,以实现千兆以太网协议中的1 Gb / s传输。在本文中,还发现当使用具有接近理想索引轮廓的GI POF时,在GI POF链路中实现了无功率损失状态,这与启动条件无关。 GI POF是用于实现稳定,高速和低成本数据通信网络的有希望的物理层。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号