首页> 外文期刊>Journal of inorganic and organometallic polymers and materials >Photocatalytic Degradation of 2,4-Dichlorophenoxyacetic Acid in Aqueous Solution Using Mn-doped ZnO/Graphene Nanocomposite Under LED Radiation
【24h】

Photocatalytic Degradation of 2,4-Dichlorophenoxyacetic Acid in Aqueous Solution Using Mn-doped ZnO/Graphene Nanocomposite Under LED Radiation

机译:Mn掺杂的ZnO /石墨烯纳米复合材料在LED辐射下光催化降解水溶液中的2,4-二氯苯氧基乙酸

获取原文
获取原文并翻译 | 示例
           

摘要

Chemical pesticides and herbicides are one of the most important pollutants in urban, agricultural and industrial wastewaters. Improper discharge of these compounds into water bodies' cause harmful effects on both environment and human health. In this study, photocatalytic degradation of 2,4-Dichlorophenoxyacetic acid (usually called 2,4-D) was investigated using Mn-doped zinc oxide/graphene nanocomposite under light emitting diodes (LED) radiation. FTIR, AFM, DLS, Zeta potential, XRD, and SEM techniques were used to determine the characteristics of the nanocomposite. The effects of process-related parameters, such as the amount of nanocomposite, initial pH, 2,4-D concentrations, and contact time, on the photocatalytic degradation of the 2,4-D were studied. The results showed that the efficiency of photocatalytic degradation of 2,4-D decreased with an increase in the initial concentration of 2,4-D, while photocatalytic degradation efficiency increased by increasing the initial pH and the nano-catalyst content. The results showed that 66.2% of 2,4-D could be photocatalytically degraded using Mn-doped zinc oxide/graphene nanocomposite under LED radiation at optimal conditions (pH 5, initial Zn concentration of 10 mg L-1, nano-composite concentration of 2 g L-1, contact time of 120 min). Findings of this experimental study concluded that photocatalysis using Mn-doped zinc oxide/graphene nanocomposite under LED radiation could efficiently remove 2,4-D herbicide from aqueous media.
机译:化学农药和除草剂是城市,农业和工业废水中最重要的污染物之一。这些化合物不当排放到水体中会对环境和人类健康造成有害影响。在这项研究中,研究了使用锰掺杂的氧化锌/石墨烯纳米复合材料在发光二极管(LED)辐射下光催化降解2,4-二氯苯氧基乙酸(通常称为2,4-D)的方法。 FTIR,AFM,DLS,Zeta电位,XRD和SEM技术用于确定纳米复合材料的特性。研究了与工艺相关的参数,如纳米复合材料的量,初始pH,2,4-D浓度和接触时间对2,4-D光催化降解的影响。结果表明,2,4-D的光催化降解效率随着2,4-D初始浓度的增加而降低,而光催化降解效率则随着初始pH和纳米催化剂含量的增加而增加。结果表明,在最佳条件(pH为5,初始Zn浓度为10 mg L-1,Zn的纳米复合浓度为pH 5)下,掺Mn的氧化锌/石墨烯纳米复合材料可以光催化降解66.2%的2,4-D。 2 g L-1,接触时间为120分钟)。这项实验研究的结果得出结论,在LED辐射下使用Mn掺杂的氧化锌/石墨烯纳米复合材料进行光催化可以有效地从水性介质中去除2,4-D除草剂。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号