...
首页> 外文期刊>Journal of Hazardous Materials >Simultaneous preconcentration of copper, zinc, cadmium, and nickel in water samples by cloud point extraction using 4-(2-pyridylazo)-resorcinol and their determination by inductively coupled plasma optic emission spectrometry
【24h】

Simultaneous preconcentration of copper, zinc, cadmium, and nickel in water samples by cloud point extraction using 4-(2-pyridylazo)-resorcinol and their determination by inductively coupled plasma optic emission spectrometry

机译:通过4-(2-吡啶偶氮)-间苯二酚浊点萃取同时富集水样中的铜,锌,镉和镍,并通过电感耦合等离子体发射光谱法测定

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

A procedure for simultaneous separation/preconcentration of copper, zinc, cadmium, and nickel in water samples, based on cloud point extraction (CPE) as a prior step to their determination by inductively coupled plasma optic emission spectrometry (ICP-OES), has been developed. The analytes reacted with 4-(2-pyridylazo)-resorcinol (PAR) at pH 5 to form hydrophobic chelates, which were separated and pre-concentrated in a surfactant-rich phase of octylphenoxypolyethoxyethanol (Triton X-114). The parameters affecting the extraction efficiency of the proposed method, such as sample pH, complexing agent concentration, buffer amount, surfactant concentration, temperature, kinetics of complexation reaction, and incubation time were optimized and their respective values were 5, 0.6 mmol L~(-1), 0.3 m L, 0.15% (w/v), 50 ℃,40min, and 10min for 15 mL of preconcentrated solution. The method presented precision (R.S.D.) between 1.3% and 2.6% (n = 9). The concentration factors with and without dilution of the surfactant-rich phase for the analytes ranged from 9.4 to 10.1 and from 94.0 to 100.1, respectively. The limits of detection (L.O.D.) obtained for copper, zinc, cadmium, and nickel were 1.2,1.1,1.0, and 6.3 μg L~(-1), respectively. The accuracy of the procedure was evaluated through recovery experiments on aqueous samples.
机译:基于浊点萃取(CPE)的同时分离/富集水样品中铜,锌,镉和镍的程序,作为通过电感耦合等离子体发射光谱法(ICP-OES)测定的先验步骤,发达。分析物与pH值为5的4-(2-吡啶基偶氮)-间苯二酚(PAR)反应形成疏水性螯合物,将其分离并在富含表面活性剂的辛基苯氧基聚乙氧基乙醇(Triton X-114)中进行预浓缩。优化样品pH,络合剂浓度,缓冲液量,表面活性剂浓度,温度,络合反应动力学和温育时间等影响该方法提取效率的参数,分别为5、0.6 mmol L〜( -1),0.3 m L,0.15%(w / v),50℃,40min和10min的预浓缩溶液为15mL。该方法的精度(R.S.D.)在1.3%和2.6%之间(n = 9)。在富集表面活性剂相的稀释液中和没有稀释时,分析物的浓度系数分别为9.4至10.1和94.0至100.1。铜,锌,镉和镍的检出限(L.O.D.)分别为1.2、1.1、1.0和6.3μgL〜(-1)。通过对水性样品进行回收实验评估了该程序的准确性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号