首页> 外文期刊>Journal of Hazardous Materials >Orthogonal synthesis of a novel hybrid layered material containing three different zincous components and its photocatalytic property investigation
【24h】

Orthogonal synthesis of a novel hybrid layered material containing three different zincous components and its photocatalytic property investigation

机译:含三种不同锌成分的新型杂化层状材料的正交合成及其光催化性能研究

获取原文
获取原文并翻译 | 示例
       

摘要

A novel hybrid layered material-Schiff Base-Zinc Complexes intercalated ZnCr-LDHs-supported ZnO-was synthesized by one-step coprecipitadon method and characterized by XRD, UV-vis DRS, SEM, TEM, BET, ICP-AES and XPS analysis. The influences of the three Zn components (intercalated between the layers, supported on the surface, distributed in the host layers of the layered material) on the crystallinity and the photocatalytic activity of ZnO/ZnCr-SalenZn-LDHs for Rhodamine B (RhB) degradation were studied in detail by orthogonal design. The results showed that the percentage of the three components has a great effect on the structure and photocatalytic performance of ZnO/ZnCr-SalenZn-LDHs. The SalenZn intercalated between the layers and the Zn distributed in the layers of the layered material were the main influencing factors, and the ZnO supported on the surface of the layered material was the secondary influencing factor. The optimum initial molar ratios were SalenZn:Cr = 0.5, Zn:Cr = 3, and ZnO:Cr = 0.75, respectively, and the photocatalytic degradation efficiency of RhB reached 96.9%. In addition, a possible mechanism of photocatalysis was discussed from the perspectives of photogenerated reactive species and photoinduced carries transfer. While, the regeneration of the best photo catalytic material was also investigated in detail.
机译:采用一步共沉淀法合成了一种新型的层状杂化材料-席夫碱-锌配合物插层的ZnCr-LDHs-负载的ZnO,并通过XRD,UV-vis DRS,SEM,TEM,BET,ICP-AES和XPS分析对其进行了表征。三种Zn组分(插入层间,表面支撑,分布在层状材料的主体层中)对ZnO / ZnCr-SalenZn-LDHs的结晶度和光催化活性对若丹明B(RhB)降解的影响通过正交设计进行了详细研究。结果表明,三种组分的百分含量对ZnO / ZnCr-SalenZn-LDHs的结构和光催化性能影响很大。影响层间插层的SalenZn和分布在层状材料层中的Zn是主要的影响因素,负载在层状材料表面的ZnO是次要影响因素。最佳初始摩尔比分别为SalenZn:Cr = 0.5,Zn:Cr = 3和ZnO:Cr = 0.75,RhB的光催化降解效率达到96.9%。此外,从光生反应物种和光生载流子转移的角度讨论了光催化的可能机理。同时,还详细研究了最佳光催化材料的再生。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号