Continuous supercritical water oxidation treatment of oil-based drill cuttings using municipal sewage sludge as diluent

摘要

Oil-based drill cuttings (OBDC) is a characteristic hazardous waste that is generated in oil and gas exploration. In this study, two typical OBDCs from shale gas fields were treated in a continuous supercritical water oxidation (SCWO) for the first time. Because both heat value and ash content (AC) in the OBDCs were well beyond the capacity of continuous operation, municipal sewage sludge (MSS) was innovatively adapted as the diluent. A mixed sludge with OBDC addition levels of 10%, 20%, and 30% was tested using a novel SCWO reactor. Mean residence times of reactants in different reaction zones were specifically calculated. Results indicated the organic carbon removal efficiency could reach up to 98.44%. Eight detected heavy metals were found to be almost completely removed into solid products, and the concentrations in liquid products were all below the discharge limits. It was also found that the SCWO reactor exhibited good anti-plugging and anti-corrosion performance. The AC in the feedstock was up to 28.58%. To the best of our knowledge, this has, hitherto, not been achieved in a continuous SCWO operation. This study provides a new approach for harmlessly and completely degrading OBDC, and is also helpful for the industrialization of SCWO technology.