Relationship between Shear-Wave Velocity and Undrained Shear Strength of Peat

摘要

A significant challenge for engineers working with peat is the estimation of the undrained shear strength (S_u). This is particularly the case for shallow, slightly overconsolidated peats found on natural hillsides and at the toe of embankments. Existing laboratory and in situ techniques may not be suitable due to issues such as access to remote areas, the resolution and accuracy of measuring equipment, sampling disturbance effects, and the influence of fibers on the measured results. It is logical to attempt to correlate S_u with shear-wave velocity (V_s) because both parameters depend on the same set of fundamental factors. A lightweight portable probe has been developed that can be used to resolve the low V_s values in peat reliably and repeatably. It was not possible to determine S_u directly from the V_s measurements. However, a strong correlation was found between normalized V_s (by water content, w) and S_u (derived from direct simple shear tests). A single operator can collect a continuous profile of V_s and w simultaneously and therefore derive a one-dimensional (ID) S_u profile for the full peat thickness. Some limitations in the use of the derived empirical equations are outlined.