首页> 外文期刊>Journal of geodynamics >Structural setting of the Southern Apennine fold-and-thrust belt (Italy) at hypocentral depth: The Calore Valley case history
【24h】

Structural setting of the Southern Apennine fold-and-thrust belt (Italy) at hypocentral depth: The Calore Valley case history

机译:南部亚平宁褶皱冲断带(意大利)在低中心深度的构造背景:卡洛尔谷案例史

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

The reconstruction of the main structural features of the Southern Apennines (Italy), in correspondence with the focal volume of some strong earthquakes that have affected this chain, can be attempted by analysing reflection seismic lines and deep well logs in comparison with surface geology. For instance, the Calore Valley and its surroundings have been the object of intense hydrocarbon exploration, and a wealth of subsurface data is available. Moreover, this area was affected by the 1688 Sannio earthquake (macroseismic magnitude 7.1), and a new location has recently been proposed for the related causative fault system. The present work defines the structural setting of the Southern Apennine chain in correspondence with this new location, and compares it with similar cases along the Italian peninsula. The analysis was focussed on the reconstruction of deep tectonic units (formed by the buried Apulia carbonate platform succession), which generally correspond to the hypocentral depths of strong earthquakes along the axis of the Southern Apennines. The results show that the Apulia platform succession is affected by three main thrusts, locally accompanied by backthrusts. The top of this succession is relatively shallow: the maximum depth does not exceed 1.8 s TWT (i.e. about 3500 mb.s.l.), while minimum depths occur in correspondence with the ramp anticlines culminations, at ~0.5 s TWT (i.e. at about 500 mb.s.l.). Moreover, data suggest that the underlying Paleozoic basement is possibly involved in thrusting. In a regional perspective, extensional seismogenic structures along the axis of the Southern Apennines seem to share some common characteristics. Indeed, they develop (ⅰ) in correspondence with an uplifted Paleozoic basement; (ⅱ) at the rear of a set of thrusts that account for the shallow Apulia units; (ⅲ) at the surface, in proximity to the leading edge of a surficial tectonic unit formed by the Apennine carbonate platform succession. The 1688 seismogenic fault system fits in with these common traits. In the light of this, we finally speculate that these common characteristics in the architecture of the chain could provide a key to the location of the major seismicity along the axis of the Southern Apennines and an interpretative model for the identification of possible areas of seismic gap in this part of the Italian peninsula.
机译:可以通过分析反射地震线和深井测井与地表地质的对比,来尝试对南部亚平宁山脉(意大利)的主要结构特征进行重建,以应对影响该链条的一些强地震的震源。例如,卡洛尔山谷及其周围地区一直是激烈的油气勘探的对象,并且可以获得大量的地下数据。此外,该地区还受到了1688年Sannio地震(宏观地震级7.1)的影响,最近已为相关的致病性断层系统提出了新的位置。本工作定义了与该新位置相对应的南部亚平宁链的结构环境,并将其与意大利半岛沿岸的类似案例进行了比较。分析的重点是深部构造单元(由埋藏的普利亚碳酸盐台地演替形成)的重建,这些构造单元通常对应于沿南亚平宁山脉轴线的强震的震中深度。结果表明,普利亚台地演替受到三个主要逆冲作用的影响,局部伴有逆冲作用。此序列的顶部相对较浅:最大深度不超过1.8 s TWT(即约3500 mb.sl),而最小深度对应于斜背斜线顶点,发生于约0.5 s TWT(即约500 mb)。 .sl)。此外,数据表明潜在的古生代基底可能与逆冲作用有关。从区域角度看,沿着南亚平宁山脉轴线延伸的地震发生结构似乎具有一些共同的特征。实际上,它们与古生代基底隆起相对应地发展。 (ⅱ)在一组浅推力的后部,这些浅推力是浅层普利亚大区的单位; (ⅲ)在地表,靠近由亚平宁碳酸盐台地层序形成的表层构造单元的前缘。 1688年的地震断层系统符合这些共同特征。有鉴于此,我们最终推测,链条结构中的这些共同特征可以为沿南亚平宁山脉轴线定位主要地震活动的位置提供一个关键,并为解释可能存在的地震缝隙区域提供解释模型在意大利半岛的这一部分。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号