首页> 外文期刊>Journal of food protection >Effect of temperature, pH, and water activity on biofilm formation by Salmonella enterica enteritidis PT4 on stainless steel surfaces as indicated by the bead vortexing method and conductance measurements.
【24h】

Effect of temperature, pH, and water activity on biofilm formation by Salmonella enterica enteritidis PT4 on stainless steel surfaces as indicated by the bead vortexing method and conductance measurements.

机译:温度,pH值和水分活度对肠炎沙门氏菌PT4在不锈钢表面形成生物膜的影响,如磁珠涡旋法和电导率测量所示。

获取原文
获取原文并翻译 | 示例
       

摘要

An assay was developed in an effort to elucidate the effect of important environmental parameters (temperature, pH, and water activity [aw]) on Salmonella Enteritidis biofilm formation on stainless steel surfaces. To achieve this, a modified microbiological technique used for biofilm studying (the bead vortexing method) and a rapid method based on conductivity measurements were used. The ability of the microorganism to generate biofilm on the stainless surfaces was studied at three temperatures (5, 20, and 37 degrees C), four pH values (4.5, 5.5, 6.5, and 7.4), and four aw values (0.5, 1.5, 5.5, and 10.5% NaCl). Results obtained by the bead vortexing method show that maximum numbers of adherent bacteria per square centimeter (106 CFU/cm2) were attained in 6 days at 20 degrees C. Biofilm formation after 7 days of incubation at 20 degrees C was found to be independent of the pH value. In addition, the high concentration of sodium chloride (10.5% NaCl, aw = 0.94) clearly inhibited the adherence of cells to the coupons. Conductance measurements were used as a supplementary tool to measure indirectly the attachment and biofilm formation of bacterial cells on stainless steel surfaces via their metabolic activity (i.e., changes in the conductance of the growth medium due to microbial growth or metabolism). Results obtained by conductance measurements corresponded well to those of the bead vortexing method. Furthermore, we were able to detect cells that remained attached on the metal surfaces even after vortexing via their metabolic activity. The results, except for demonstrating environmental-dependent Salmonella Enteritidis biofilm formation, indicated that traditional vortexing with beads did not remove completely biofilm cells from stainless steel; hence, conductance measurements seem to provide a more sensitive test capable to detect down to one single viable organism.
机译:为了阐明重要的环境参数(温度,pH和水活度[aw])对肠炎沙门氏菌在不锈钢表面形成生物膜的影响,开发了一种检测方法。为此,使用了一种用于生物膜研究的改良微生物技术(微珠涡旋法)和一种基于电导率测量的快速方法。在三个温度(5、20和37摄氏度),四个pH值(4.5、5.5、6.5和7.4)和四个aw值(0.5、1.5)下研究了微生物在不锈钢表面上产生生物膜的能力。 ,5.5和10.5%NaCl)。通过珠涡旋法获得的结果表明,在20摄氏度下6天达到每平方厘米最大附着细菌数量(106 CFU / cm2)。发现在20摄氏度下培养7天后生物膜的形成与pH值。此外,高浓度的氯化钠(10.5%NaCl,aw = 0.94)明显抑制了细胞对试样的粘附。电导率测量被用作辅助工具,以通过细菌的代谢活性(即由于微生物生长或代谢引起的生长介质电导率的变化)间接测量不锈钢表面细菌细胞的附着和生物膜形成。通过电导测量获得的结果与磁珠涡旋法的结果非常吻合。此外,我们甚至能够通过其代谢活动检测出涡旋后仍附着在金属表面上的细胞。结果表明,除了证明环境依赖性肠炎沙门氏菌生物膜形成外,还表明传统的用珠子涡旋并不能从不锈钢中完全去除生物膜细胞。因此,电导测量似乎提供了一种更灵敏的测试,能够检测到单个活生物体。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号