首页> 外文期刊>Journal of food engineering >Grinding characteristics of some legumes
【24h】

Grinding characteristics of some legumes

机译:一些豆类的研磨特性

获取原文
获取原文并翻译 | 示例
           

摘要

Legumes/pulses namely, lentil (Lens esculenta), cowpea (Vigna unguiculata), blackgram (Phaseolus mungo), greengram (Phaseolus aureus) and Bengalgram (Cicer arietinum) in their dhal (dehusked split pulse) form were studied for their grinding characteristics from initial coarse grinding to further fine grinding of coarse particles resulting in 860-75 μm and 210-45 μm respectively, using an impact mill. The ground samples were screened and analyzed using differential analysis technique. The results indicated lentil to be the most amenable to grinding resulting in highest increase in surface area and also number of particles, and Bengalgram, the least in this respect. Cowpea, blackgram and greengram showed almost similar behavior with respect to increase in surface area and number of particles on grinding from coarse to finer particles. Though an increase in energy consumption was noted from coarse to fine grinding, it did not entirely depend on their breaking strength either. Analysis of the particle distribution of the ground samples indicated that grinding characteristics depends largely on some inherent property of these legumes and not merely on the size or shape of the samples during grinding.
机译:研究了豆科植物/豆类的钝化形式(扁豆(去壳分裂脉冲)),扁豆(L豆),cow豆(Vigna unguiculata),黑豆草(菜豆),绿豆豆(金豆菜)和孟加拉草(C菜)。初始粗磨,然后使用冲击磨将粗颗粒进一步细磨,分别得到860-75μm和210-45μm。筛选地面样品并使用差分分析技术进行分析。结果表明小扁豆最适合研磨,从而导致表面积和颗粒数量的增加最高,而在此方面,孟加拉最小。 increase豆,黑豆和绿豆在从粗颗粒到细颗粒的研磨中,表面积和颗粒数量的增加几乎表现出相似的行为。尽管从粗磨到精磨的能耗都有所增加,但这也不完全取决于它们的断裂强度。对研磨样品的颗粒分布的分析表明,研磨特性在很大程度上取决于这些豆类的某些固有特性,而不仅取决于研磨过程中样品的尺寸或形状。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号