Simulation of Premixed and Partially Premixed Jet-in-Crossflow Flames at High Pressure

摘要

In this paper, we explore the operational map of a lean axial-staged combust or of premixed and partially premixed reacting jet-in-crossflow flames at high -pressure (5 atm). This study attempts to expand the data to relatively high pressure and could significantly aid scaling to real gas turbine engine conditions at 20-30 atm. High-speed camera, particle image velocimetry (PIV), CH* chemiluminescence, temperature, and pressure measurements were taken and processed to allow accurate reconstruction of six operating points relative to computational fluid dynamics (CFD) simulations under minimal adjustments. Variation of lean main stage (ψ = 0.575 and 0.73) and rich jet (ψ = 1.1,4, and 8) equivalence ratio has been investigated for a four mm axial jet. The fully premixed flames were found to be controlled by the crossflow temperature before ignition and the cross-flow oxygen content during combustion. Analysis of flame shape and position for the partially premixed operating points describes a lee stabilized as well as a more unsteady windward flame branch. Adjustment of added jet fuel and crossflow temperature along with its corresponding oxygen level is required to attain a compact flame body. The risk of delaying combustion progress is significantly increased at a richer jet ψ= 8 and an overshooting, spatially divided flame was attained with a main stage ψ= 0.73. Control toward a compact flame body is critical to allow combustion at reasonable reaction rate.