首页> 外文期刊>Journal of Energy Storage >An equivalent circuit model for Vanadium Redox Batteries via hybrid extended Kalman filter and Particle filter methods
【24h】

An equivalent circuit model for Vanadium Redox Batteries via hybrid extended Kalman filter and Particle filter methods

机译:通过混合扩展卡尔曼滤波器和粒子滤波器方法的钒氧化还原电池等效电路模型

获取原文
获取原文并翻译 | 示例
           

摘要

This paper proposes a model for parameter estimation of Vanadium Redox Flow Battery based on both the electrochemical model and the Equivalent Circuit Model. The equivalent circuit elements are found by a newly proposed optimization to minimized the error between the Thevenin and KVL-based impedance of the equivalent circuit. In contrast to most previously proposed circuit models, which are only introduced for constant current charging, the proposed method is applicable for all charging procedures, i.e., constant current, constant voltage, and constant current-constant voltage charging procedures. The proposed model is verified on a nine-cell VRFB stack by a sample constant current-constant voltage charging. As observed, in constant current charging mode, the terminal voltage model matches the measured data closely with low deviation; however, the terminal voltage model shows discrepancies with the measured data of VRFB in constant voltage charging. To improve the proposed circuit model's discrepancies in constant voltage mode, two Kalman filters, i.e., hybrid extended Kalman filter and particle filter estimation algorithms, are used in this study. The results show the accuracy of the proposed equivalent with an average deviation of 0.88% for terminal voltage model estimation by the extended KF-based method and the average deviation of 0.79% for the particle filter-based estimation method, while the initial equivalent circuit has an error of 7.21%. Further, the proposed procedure extended to estimate the state of charge of the battery. The results show an average deviation of 4.2% in estimating the battery state of charge using the PF method and 4.4% using the hybrid extended KF method, while the electrochemical SoC estimation method is taken as the reference. These two Kalman Filter based methods are more accurate compared to the average deviation of state of charge using the Coulomb counting method, which is 7.4%.
机译:本文提出了一种基于电化学模型和等效电路模型的钒氧化还原流电池参数估计模型。通过新提出的优化找到等效电路元件,以最小化临时和基于KVL的阻抗之间的误差。与最先前提出的电路模型相比,仅引入恒流充电,所提出的方法适用于所有充电过程,即恒流,恒定电压和恒流恒压充电过程。通过采样恒定电流 - 恒压充电在九个单元VRFB堆栈上验证所提出的模型。如图所示,在恒流充电模式下,端子电压模型与低偏差紧密地匹配测量数据;然而,终端电压模型显示恒压充电中VRFB的测量数据的差异。为了提高所提出的电路模型在恒定电压模式下的差异,在本研究中使用了两个卡尔曼滤波器,即混合扩展卡尔曼滤波器和粒子滤波器估计算法。结果表明,终端电压模型估计的平均偏差为终端电压模型估计的平均偏差和基于粒子滤波器的估计方法的平均偏差为0.79%,而初始等效电路误差为7.21%。此外,所提出的程序延长以估计电池的充电状态。结果显示使用PF方法估计电池充电状态和4.4%的平均偏差4.2%,使用混合延长的KF方法,而电化学SOC估计方法被视为参考。与使用库仑计数方法的电荷状态的平均偏差相比,这两个基于卡尔曼的基于卡尔曼滤波器的方法更准确,这是7.4%。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号