首页> 外文期刊>Journal of Contaminant Hydrology >Modeling solute reactivity in a phreatic solution conduit penetrating a karst aquifer
【24h】

Modeling solute reactivity in a phreatic solution conduit penetrating a karst aquifer

机译:在穿透岩溶含水层的潜水溶液导管中模拟溶质反应性

获取原文
获取原文并翻译 | 示例
           

摘要

A two-dimensional model for solute migration, transformation, and deposition in a phreatic solution conduit penetrating a karst aquifer is presented in which the solute is anthropogenic to the natural system. Transformation of a reacting solute in a solution conduit has generally been accepted as likely occurring but actual physical measurements and mathematical analyses of the suspected process have been generally minimally investigated, primarily because of the logistical difficulties and complexities associated with solute transport through solution conduits. The model demonstrates how a reacting solute might decay or be transformed to a product solute some of which then migrates via radial dispersion to the conduit wall where it may become adsorbed. Model effects vary for laminar flow and turbulent flow in the axial direction. Dispersion in the radial direction also exhibits marked differences for both laminar flow and turbulent flow. Reaction zones may enhance subsequent reactions due to some overlap resulting from the longitudinal dispersion caused by flow in the axial direction. Simulations showed that varying the reaction rate coefficient strongly affects solute reactions, but that varying deposition coefficients had only minimal impacts. The model was applied to a well-known tracer test that used the tracer dye, Rhodamine WT, which readily converts to deaminoalkylated Rhodamine WT after release, to illustrate how the model may be u ! sed to suggest one possible cause, in addition to other possible causes, for less than 100 tracer-mass recovery. In terms of pollutants in a karst aquifer the model also suggests one possible mechanism for pollutant transformation in a solution conduit.
机译:提出了一个二维模型,用于溶质在穿透喀斯特含水层的潜水溶液管道中迁移,转化和沉积,其中溶质是人为的天然系统。溶液导管中反应性溶质的转化通常被认为是可能发生的,但是通常对可疑过程的实际物理测量和数学分析已进行了最少的研究,这主要是由于与溶质通过溶液导管的运输相关的后勤困难和复杂性。该模型演示了反应性溶质如何分解或转化为产物溶质,然后其中某些溶质通过径向分散迁移到导管壁,并在其中被吸附。模型效果随轴向的层流和湍流而变化。在径向方向上的分散对于层流和湍流也表现出明显的差异。由于由沿轴向的流动引起的纵向分散而引起的一些重叠,反应区可以增强随后的反应。模拟表明,改变反应速率系数对溶质反应有很大影响,但是改变沉积系数仅具有最小的影响。将该模型应用于众所周知的示踪剂测试中,该示踪剂使用了示踪染料若丹明WT,该染料在释放后很容易转化为脱氨基烷基的若丹明WT,以说明该模型可能是什么样的。 sed提出了一种可能的原因,以及其他可能的原因,导致示踪剂质量回收率低于100。就岩溶含水层中的污染物而言,该模型还提出了一种在溶液导管中进行污染物转化的可能机制。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号