首页> 外文期刊>Journal of combustion >Conditional Moment Closure Modelling ofa Lifted H_2/N_2 Turbulent Jet Flame Using the Presumed Mapping Function Approach
【24h】

Conditional Moment Closure Modelling ofa Lifted H_2/N_2 Turbulent Jet Flame Using the Presumed Mapping Function Approach

机译:H推定的H_2 / N_2湍流射流火焰的条件矩闭合模型

获取原文
获取原文并翻译 | 示例
           

摘要

A lifted hydrogenitrogen turbulent jet flame issuing into a vitiated coflow is investigated using the conditional moment closure (CMC) supplemented by the presumed mapping function (PMF) approach for the modelling of conditional mixing and velocity statistics. Using a prescribed reference field, the PMF approach yields a presumed probability density function (PDF) for the mixture fraction, which is then used in closing the conditional scalar dissipation rate (CSDR) and conditional velocity in a fully consistent manner. These closures are applied to a lifted flame and the findings are compared to previous results obtained using β-PDF-based closures over a range of coflow temperatures (T_c). The PMF results are in line with those of the β-PDF and compare well to measurements. The transport budgets in mixture fraction and physical spaces and the radical history ahead of the stabilisation height indicate that the stabilisation mechanism is susceptible to T_c. As in the previous β-PDF calculations, autoignition around the "most reactive" mixture fraction remains the controlling mechanism for sufficiently high T_c. Departure from the β-PDF predictions is observed when T_c is decreased as PMF predicts stabilisation by means of premixed flame propagation. This conclusion is based on the observation that lean mixtures are heated by downstream burning mixtures in a preheat zone developing ahead of the stabilization height. The spurious sources, which stem from inconsistent CSDR modelling, are further investigated. The findings reveal that their effect is small but nonnegligible, most notably within the flame zone.
机译:使用条件矩闭合(CMC)和假定的映射函数(PMF)方法进行补充,对条件混合和速度统计进行建模,研究了发散为流通气流的氢/氮湍流喷射火焰。使用规定的参考字段,PMF方法会为混合物分数生成一个假定的概率密度函数(PDF),然后将其用于以完全一致的方式关闭条件标量耗散率(CSDR)和条件速度。将这些封闭物应用于火焰,并将发现结果与使用基于β-PDF的封闭物在同流温度(T_c)范围内获得的先前结果进行比较。 PMF结果与β-PDF的结果一致,并且可以很好地与测量结果进行比较。混合分数和物理空间中的运输预算以及稳定高度之前的激进历史表明,稳定机制易受T_c的影响。与先前的β-PDF计算一样,“最高反应性”混合物组分周围的自燃仍然是足够高T_c的控制机制。当T_c降低时,由于PMF通过预混火焰传播预测稳定,因此观察到与β-PDF预测不一致。该结论基于以下观察结果:在稳定高度之前形成的预热区内,稀薄混合物被下游燃烧混合物加热。进一步研究了源于CSDR建模不一致的杂散源。这些发现表明,它们的作用很小,但不可忽略,特别是在火焰区域内。

著录项

  • 来源
    《Journal of combustion》 |2015年第2015期|257145.1-257145.24|共24页
  • 作者单位

    Department of Mechanical and Mechatronics Engineering, University of Waterloo, 200 University Avenue West, Waterloo, ON, Canada N2L 3G1,Institut de Combustion Aerothermique Reactivite et Environnement (CNRS), 1C avenue de la Recherche Scientifique, 45071 Orleans Cedex 2, France;

    Department of Mechanical and Mechatronics Engineering, University of Waterloo, 200 University Avenue West, Waterloo, ON, Canada N2L 3G1;

  • 收录信息
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号