The reuse of red brick powder as a filler in styrene-butadiene rubber

摘要

The reasonable recycling of demolition wastes has attracted worldwide attention. Methods need to be investigated to reuse the waste materials such as broken bricks. This study added waste brick powder into the styrene-butadiene rubber (SBR) as one kind of filler in place of traditional fillers such as carbon black and white carbon black. The collected red brick fragments were broken into powder and filled in SBR to strengthen its mechanical property. Silane coupling agent KH-550 was utilized to improve the binding force between filler and rubber. The tensile property, conductivity and shore hardness of the vulcanized rubber was achieved. Results showed that the tensile strength of vulcanized SBR increased from 2.5 MPa to 3.6 MPa with the increase of brick powder filled in rubber. The Shore hardness increased from 43 to 53, while the volume resistance of the vulcanized rubber barely changed, maintaining around 5 k Omega cm. The rubber filled with modified brick powder showed better mechanical property than the unmodified. Economic and environmental profit were also evaluated. By applying red brick powder to polymer system, the problem of disposing demolition garbage can be eased and the cost will be markedly decreased in manufacturing polymer products. (C) 2020 Elsevier Ltd. All rights reserved.