首页> 外文期刊>Journal of Cleaner Production >A time-saving method to evaluate the thermal insulation performance of cryogenic vessels
【24h】

A time-saving method to evaluate the thermal insulation performance of cryogenic vessels

机译:一种评估低温血管保温性能的节省时间

获取原文
获取原文并翻译 | 示例
           

摘要

Equivalent mass loss is a critical index used to evaluate the thermal insulation performance of cryogenic vessels. The current test standards for measuring the thermal insulation performance of cryogenic vessels in different countries require a long testing time and waste a considerable amount of working medium. In this study, a method that can shorten the test time of the thermal insulation performance of cryogenic vessels is established. Different from the current test methods that rely entirely on experiments, the method proposed in this paper is a semi-experimental and semi-analytical calculation method. The proposed method is based on the one-dimensional heat transfer analysis of a cryogenic vessel and short-term experimental test data, and it can be used to predict the mass loss over a long period of time. Moreover, the method can predict the mass loss of a cryogenic vessel at a high liquid level when the mass loss at a low liquid level is known. When this method is used to predict the mass loss, the comparison with the experimental data shows that the maximum relative error of the instantaneous mass flow is 21.1% and the relative error of the cumulative mass flow is less than 8%. When this method is used for the calculation of heat leakage between different liquid levels, the results show that the larger the difference between the two liquid levels, the greater the error of leakage heat, and the maximum is 18.9%. (C) 2020 Elsevier Ltd. All rights reserved.
机译:等效质量损失是用于评估低温容器的绝热性能的关键指数。用于测量不同国家的低温血管保温性能的当前测试标准需要长时间的测试时间并浪费大量的工作介质。在该研究中,建立了一种方法,可以缩短低温容器的绝热性能的耐热性能的测试时间。不同于目前依赖于实验的测试方法,本文提出的方法是一种半实验和半分析计算方法。所提出的方法基于低温血管和短期实验测试数据的一维传热分析,可用于预测长时间的质量损失。此外,当已知低液位的质量损失时,该方法可以预测低液位下低温容器的质量损失。当该方法用于预测质量损失时,与实验数据的比较表明,瞬时质量流量的最大相对误差是21.1%,累积质量流量的相对误差小于8%。当该方法用于计算不同液体水平之间的热泄漏时,结果表明,两个液体水平之间的差异越大,漏热的误差越大,最大值为18.9%。 (c)2020 elestvier有限公司保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号