Critical analysis and valorization potential of battery industry sludge: Speciation, risk assessment and metal recovery

摘要

Lime treated battery wastewater sludge (BWS) was collected, characterized to assess the heavy metal fractions, safe disposal potential, and possible valorization through the Community Bureau of Reference (BCR) scheme, Toxicity Characteristic Leaching Procedure (TCLP), diethylenetriaminepentaacetic acid (DTPA) test, risk assessment, and progressive acidification. In the first place, BWS was found to be a potential building material for construction, fortified by spectroscopic studies. Total metal analysis showed that the BWS was highly contaminated with Pb, Fe, Zn, Cu, and Cd with concentration of 8322 +/- 11, 15721 +/- 21, 310 +/- 2, 175 +/- 4, and 1215 +/- 7 mg/kg, respectively. Physical segregation of BWS particles in 10, 10-45, 45-75, and 75 mu m size showed that the heavy metals were more concentrated in the finer fractions and, only 5% were present in coarse fraction. BCR extractions showed that the order of prominence in the exchangeable fraction was as Al Ca Cu Ni Zn Mn Mg Co Pb Cd Fe, whereas, Fe, Mn, and Zn were abundant in the reducible fraction. Pb (67%) and Cu (55%) showed the highest percentage in the oxidizable fraction and, Mg and Zn were mostly present in the residual form. The TCLP concentrations for Pb and Cd exceeded the prescribed standards and toxicity indices classified BWS as a hazardous waste with very high-risk for land disposal. Valorization of sludge was conducted through progressive acidification using five different acids. Citric acid showed the best metal recovery potential of 47, 77, 60,19, 58, 59, 67, 41, and 51% for Pb, Fe, Cu, Cd, Ni, Mn, Al, Co, and Zn but the kinetics of metals leaching was slow. H2O2 further improved metal recovery mobilizing organically bound metals mediated through the formation of HO center dot radicals. (C) 2017 Elsevier Ltd. All rights reserved.