This technical note discusses water penetration resistance studies on a solid interlocking block masonry system, adopting ASTM E 514 - 90 for the influence of the type of bedding (dry stacking, thin jointing, and mortar), surface finishes (stucco and plaster on one side or both sides), and simulated wind velocities (0, 50, and 100 km/h). Silblock masonry without a surface finish is suitable for rain protected and interior walls. Introduction of any form of mortar bedding (thin jointing or conventional) resulted in higher dampness than the Dry-stacked specimens.
展开▼
机译：本技术说明讨论了在固体联锁砌体系统上的抗水渗透性研究，采用ASTM E 514-90来影响床上用品类型（干砌，薄缝和砂浆），表面处理（一侧为灰泥和灰泥）的影响或两侧）和模拟风速（0、50和100 km / h）。没有表面光洁度的Silblock砌体适用于防雨和内墙。引入任何形式的砂浆垫层（薄缝或常规缝隙）都比干叠标本具有更高的湿度。
展开▼
