首页> 外文期刊>Journal of Applied Mechanics and Technical Physics >ACCOUNTING FOR THE FREQUENCY-DEPENDENT DYNAMIC ELASTIC MODULUS OF DURALUMIN IN DEFORMATION PROBLEMS
【24h】

ACCOUNTING FOR THE FREQUENCY-DEPENDENT DYNAMIC ELASTIC MODULUS OF DURALUMIN IN DEFORMATION PROBLEMS

机译:硬质合金在变形问题中与频率有关的动态弹性模量的计算

获取原文
获取原文并翻译 | 示例
           

摘要

The flexural vibrations of D16AT Duralumin specimens have been investigated, showing that the dynamic elastic modulus of D16AT Duralumin is significantly dependent on frequency. It has been found that the dynamic elastic modulus significantly reduces in the frequency range 0-20 Hz, and at high frequencies, it is practically constant. A general method has been developed to determine the modes and frequency of free vibrations of a structure taking into account the dependence of the dynamic elastic modulus of the material on its deformation frequency. Numerical experiments on impulsive loading of an elongated plate have been performed, showing that the frequency dependence of the dynamic elastic modulus of Duralumin should be taken into account in structural analysis.
机译:研究了D16AT硬铝样品的挠曲振动,结果表明D16AT硬铝样品的动态弹性模量显着取决于频率。已经发现,动弹性模量在0-20Hz的频率范围内显着降低,并且在高频下,它实际上是恒定的。考虑到材料的动态弹性模量对其变形频率的依赖性,已经开发出一种确定结构自由振动的方式和频率的通用方法。已经进行了拉长板的脉冲载荷的数值实验,表明在结构分析中应考虑硬铝的动态弹性模量的频率依赖性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号