首页> 外文期刊>Journal of Analytical & Applied Pyrolysis >Effect of torrefaction pretreatment on the fast pyrolysis behavior of biomass: Product distribution and kinetic analysis on spruce-pin-fir sawdust
【24h】

Effect of torrefaction pretreatment on the fast pyrolysis behavior of biomass: Product distribution and kinetic analysis on spruce-pin-fir sawdust

机译:Torrefaction预处理对生物质快速热解作业的影响:产品分布和云杉灭菌锯末的动力学分析

获取原文
获取原文并翻译 | 示例
       

摘要

Torrefaction pretreatment is of great significance to the enhancements of biomass characteristics. Product distribution and kinetics analysis of spruce-pin-fir (SPF) sawdust and its torrefaction samples were studied during the fast pyrolysis process. Under anaerobic conditions, torrefied biomass was prepared at different temperatures in a slot-rectangular spouted bed reactor. Fast pyrolysis experiments were conducted in a tube furnace with online mass spectrometry. The effects of torrefaction degree and pyrolysis temperature on product distribution were discussed. The main gaseous products, ie. CO, CO2, H2, and CH4, were investigated, and kinetic data of gaseous product formation was solved based on the isoconversional method. Other volatiles were the main product during the fast pyrolysis process, and the char yield was the lowest. With the increase of torrefaction degrees, the yield of char increased from 19.80 % to 22.09 % at 800 degrees C. The pyrolysis gas yield decreased from 25.78 % to 17.18 % as the torrefaction temperature increased from 240 degrees C to 300 degrees C. The gaseous products were mainly CO and CO2. The content of CO tended to increase, and the content of CO2 decreased when the pyrolysis temperature increased. The order of activation energy was E (CO2) E (H2) E (CO) E (CH4) during the fast pyrolysis of SPF. The activation energy of the CO2, CH4, and H2 increased with the increase of the torrefaction temperature. According to different evaluation indexes, the optimal setting of reaction conditions is determined.
机译:Torrefaction预处理对生物质特性的增强具有重要意义。在快速热解过程中,研究了云杉引脚 - 冷杉(SPF)锯末及其烘焙样品的产品分布和动力学分析。在厌氧条件下,在槽矩形喷射床反应器中的不同温度下制备泪珠的生物质。快速热解实验在具有在线质谱的管炉中进行。讨论了烘焙程度和热解温对产物分布的影响。主要气态产品,即。研究了CO,CO 2,H 2和CH4,基于异释法解决了气态产物形成的动力学数据。其他挥发物是在快速热解过程中的主要产物,炭产率最低。随着烘焙程度的增加,炭的产率从19.80%增加到800℃的19.80%至22.09%。随着烘焙温度从240℃升高至300℃,热解气得产量从25.78%降低至17.18%。气态产品主要是CO和CO2。 CO的含量趋于增加,并且当热解温增加时,CO2的含量降低。活化能量的顺序是E(CO2)& E(h2)& E(co)& E(CH4)在SPF的快速溶解过程中。随着烘焙温度的增加,CO2,CH4和H2的激活能量增加。根据不同的评价指标,确定反应条件的最佳设置。

著录项

  • 来源
    《Journal of Analytical & Applied Pyrolysis》 |2021年第9期|105259.1-105259.9|共9页
  • 作者单位

    Xi An Jiao Tong Univ Sch Chem Engn & Technol Shaanxi Key Lab Energy Chem Proc Intensificat Xian 710049 Shaanxi Peoples R China;

    Xi An Jiao Tong Univ Sch Chem Engn & Technol Shaanxi Key Lab Energy Chem Proc Intensificat Xian 710049 Shaanxi Peoples R China;

    Xi An Jiao Tong Univ Sch Chem Engn & Technol Shaanxi Key Lab Energy Chem Proc Intensificat Xian 710049 Shaanxi Peoples R China;

    Xi An Jiao Tong Univ Sch Chem Engn & Technol Shaanxi Key Lab Energy Chem Proc Intensificat Xian 710049 Shaanxi Peoples R China;

    Xi An Jiao Tong Univ Sch Chem Engn & Technol Shaanxi Key Lab Energy Chem Proc Intensificat Xian 710049 Shaanxi Peoples R China;

    Xi An Jiao Tong Univ Sch Chem Engn & Technol Shaanxi Key Lab Energy Chem Proc Intensificat Xian 710049 Shaanxi Peoples R China;

    Univ British Columbia Dept Chem & Biol Engn 2360 East Mall Vancouver BC V6T 1Z3 Canada;

    Univ British Columbia Dept Chem & Biol Engn 2360 East Mall Vancouver BC V6T 1Z3 Canada;

  • 收录信息 美国《科学引文索引》(SCI);美国《工程索引》(EI);美国《生物学医学文摘》(MEDLINE);
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

    Spruce-pin-fir sawdust; Torrefaction; Fast pyrolysis; Products distribution; Kinetic characteristics;

    机译:云杉引脚冷杉锯末;烘焙;快速热解;产品分布;动力学特征;

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号