首页> 外文期刊>Journal of Analytical & Applied Pyrolysis >Catalytic fast pyrolysis with metal-modified ZSM-5 catalysts in inert and hydrogen atmospheres
【24h】

Catalytic fast pyrolysis with metal-modified ZSM-5 catalysts in inert and hydrogen atmospheres

机译:在惰性和氢气气氛中使用金属改性的ZSM-5催化剂催化快速热解

获取原文
获取原文并翻译 | 示例
       

摘要

The objective of this work was to determine the impact of hydrogen-activating metals on catalytic fast pyrolysis over ZSM-5 with and without hydrogen addition. Ga-, Ni-, Cu-, Co-, and Pt-modified ZSM-5 catalysts with metal to -aluminum molar ratios of 2 were prepared by incipient wetness method. The catalysts were evaluated for hydrocarbon and oxygenate yields and for deactivation by analytical pyrolysis (Py-GC MS), and post-reaction catalysts for characterization were prepared in a larger fixed-bed reactor. In inert atmosphere, there was a linear correlation between both the hydrocarbon yield and coke formation and density of strong acid sites, and the main impact of the metals was occlusion of active sites in ZSM-5, leading to proportional reductions in hydrocarbon and coke yields. With the addition of hydrogen, several metals (Pt, Ni, Cu, Co) activated hydrogen and further reduced coke formation, leading to improvements in the ratio of hydrocarbons to coke. No metal modified catalyst out-performed fresh unmodified ZSM-5 in terms of hydrocarbon yield; however, Ni/ZSM-5 and Cu/ZSM-5 in hydrogen produced comparable hydrocarbon yields to ZSM-5 while reducing coke formation.
机译:这项工作的目的是确定在添加和不添加氢的情况下,氢活化金属对ZSM-5催化快速热解的影响。采用初湿法制备了金属与铝的摩尔比为2的Ga,Ni,Cu,Co和Pt改性的ZSM-5催化剂。通过分析热解(Py-GC MS)评估了催化剂的碳氢化合物和含氧化合物的收率以及失活,并在较大的固定床反应器中制备了用于表征的后反应催化剂。在惰性气氛中,碳氢化合物的收率与焦炭的形成和强酸中心的密度之间存在线性关系,金属的主要影响是ZSM-5中活性位的闭塞,导致碳氢化合物和焦炭的产量成比例降低。随着氢的加入,几种金属(Pt,Ni,Cu,Co)活化了氢,并进一步减少了焦炭的形成,从而提高了碳氢化合物与焦炭的比例。就烃产率而言,没有金属改性的催化剂优于新鲜的未改性的ZSM-5。但是,氢气中的Ni / ZSM-5和Cu / ZSM-5产生的烃产率与ZSM-5相当,同时减少了焦炭的形成。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号