首页> 外文期刊>Journal of the American Chemical Society >Ordered Mesoporous Crystalline γ-Al2O3 with Variable Architecture and Porosity from a Single Hard Template
【24h】

Ordered Mesoporous Crystalline γ-Al2O3 with Variable Architecture and Porosity from a Single Hard Template

机译:从单个硬模板中订购具有可变结构和孔隙度的有序介孔晶体γ-Al2O3

获取原文
获取原文并翻译 | 示例
       

摘要

In this paper, an efficient route is developed for controllable synthesis of ordered mesoporous alumina (OMA) materials with variable pore architectures and high mesoporosity, as well as crystalline framework. The route is based on the nanocasting pathway with bimodal mesoporous carbon as the hard template. In contrast to conventional reports, we first realize the possibility of creating two ordered mesopore architectures by using a single carbon hard template obtained from organic−organic self-assembly, which is also the first time such carbon materials are adopted to replicate ordered mesoporous materials. The mesopore architecture and surface property of the carbon template are rationally designed in order to obtain ordered alumina mesostructures. We found that the key factors rely on the unique bimodal mesopore architecture and surface functionalization of the carbon hard template. Namely, the bimodal mesopores (2.3 and 5.9 nm) and the surface functionalities make it possible to selectively load alumina into the small mesopores dominantly and/or with a layer of alumina coated on the inner surface of the large primary mesopores with different thicknesses until full loading is achieved. Thus, OMA materials with variable pore architectures (similar and reverse mesostructures relative to the carbon template) and controllable mesoporosity in a wide range are achieved. Meanwhile, in situ ammonia hydrolysis for conversion of the metal precursor to its hydroxide is helpful for easy crystallization (as low as 500 °C). Well-crystallized alumina frameworks composed of γ-Al2O3 nanocrystals with sizes of 6−7 nm are obtained after burning out the carbon template at 600 °C, which is advantageous over soft-templated aluminas. The effects of synthesis factors are demonstrated and discussed relative to control experiments. Furthermore, our method is versatile enough to be used for general synthesis of other important but difficult-to-synthesize mesoporous metal oxides, such as magnesium oxide. We believe that the fundamentals in this research will provide new insights for rational synthesis of ordered mesoporous materials.
机译:在本文中,开发了一种可控的有序介孔氧化铝(OMA)材料的可控合成方法,该方法具有可变的孔结构和高介孔率以及晶体骨架。该路线基于以双峰介孔碳为硬模板的纳米浇铸路线。与常规报告相反,我们首先意识到使用从有机有机自组装获得的单个碳硬模板来创建两个有序介孔结构的可能性,这也是此类碳材料首次被采用来复制有序介孔材料。碳模板的介孔结构和表面性能经过合理设计,以获得有序的氧化铝介孔结构。我们发现关键因素取决于独特的双峰中孔结构和碳硬模板的表面功能化。即,双峰中孔(2.3和5.9nm)和表面功能性使得可以选择性地将氧化铝主要地和/或在不同厚度的大初级中孔的内表面上涂覆一层氧化铝直至完全填充氧化铝。加载完成。因此,获得了具有可变的孔结构(相对于碳模板相似的和反向的介孔结构)和在宽范围内可控的介孔率的OMA材料。同时,原位氨水解可将金属前体转化为氢氧化物,易于结晶(低至500°C)。在600°C烧掉碳模板后,获得了由γ-Al 2 O 3 纳米晶体组成的结晶良好的氧化铝骨架,尺寸为6-7 nm。优于软模板氧化铝。相对于对照实验,证明并讨论了合成因子的作用。此外,我们的方法用途广泛,足以用于其他重要但难以合成的中孔金属氧化物(例如氧化镁)的一般合成。我们相信,这项研究的基础将为有序介孔材料的合理合成提供新的见解。

著录项

  • 来源
    《Journal of the American Chemical Society》 |2010年第34期|p.12042-12050|共9页
  • 作者

    Zhangxiong Wu;

  • 作者单位

    Department of Chemical Engineering, Monash University, Clayton, Victoria 3800, Australia, and Department of Chemistry and Laboratory of Advanced Materials, Fudan University, Shanghai 200433, P. R. China;

  • 收录信息 美国《科学引文索引》(SCI);美国《工程索引》(EI);美国《生物学医学文摘》(MEDLINE);美国《化学文摘》(CA);
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

  • 入库时间 2022-08-18 00:50:20

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号