Buckling Behavior of Composite Laminated Stiffened Panels Under Combined Shear-Axial Compression

H. Abramovich; T. Weller; C. Bisagni

首页> 外文期刊>Journal of Aircraft >Buckling Behavior of Composite Laminated Stiffened Panels Under Combined Shear-Axial Compression

【24h】

Buckling Behavior of Composite Laminated Stiffened Panels Under Combined Shear-Axial Compression

机译：复合材料叠合加筋板在组合剪切-轴向压缩下的屈曲行为

获取原文

获取原文并翻译 | 示例

掌桥外文数据库（机构版） >>

开具论文收录证明 >>

页面导航

摘要
著录项
相似文献
相关主题

摘要

Experimental results are reported on the behavior of four torsion boxes, each comprising two stringer-stiffened cylindrical graphite-epoxy composite panels that were subjected to torsion, axial loading, and their combinations. The buckling and postbucklin

机译：关于四个扭力箱的性能的实验结果已有报道，每个扭力箱都包括两个经过扭转，轴向载荷及其组合的加劲肋的圆柱形石墨-环氧树脂复合板。屈曲和postbucklin

著录项

来源
《Journal of Aircraft》 |2008年第2期|p.402-413|共12页
作者
H. Abramovich; T. Weller; C. Bisagni;
展开▼
作者单位

Technion—Israel Institute of Technology, 32000 Haifa, Israel;

展开▼
收录信息美国《科学引文索引》(SCI);美国《工程索引》(EI);
原文格式 PDF
正文语种 eng
中图分类航空;
关键词
E_(11): = young's modulus in the principal direction; E_(22): = young's modulus in the minor direction; G_(12): = shear modulus; L: = total length; L_(al): = arc length; L_n: = nominal length; P_(const): = constant axial compression; P_(cr): = critical a;

机译：E_（11）：=主方向上的杨氏模量;E_（22）：=短边方向上的杨氏模量;G_（12）：=剪切模量;L：=总长度;L_（al）：=弧长;L_n：=公称长度;P_（const）：=恒定轴向压缩;P_（cr）：=临界a;
入库时间 2022-08-18 02:31:59

相似文献

外文文献
中文文献
专利

1. Effect of fatigue loading on impact damage and buckling/post-buckling behaviors of stiffened composite panels under axial compression [J] . Feng Yu, He Yuting, Zhang Haoyu, Composite Structures . 2017,第MARa期

机译：疲劳载荷对加筋复合板轴向压缩冲击破坏和屈曲/后屈曲行为的影响
2. Dynamic buckling of laminated composite stringer stiffened CFRP panels under axial compression [J] . Mouhat Ouadia, Khamlichi Abdellatif, Hasnae Boubel, MATEC Web of Conferences . 2018,第2016期

机译：层压复合材料纵筋加劲CFRP板在轴向压缩下的动态屈曲
3. Reliability assessment of post-buckling compressive strength of laminated composite plates and stiffened panels under axial compression [J] . Chen NZ, Soares CG International Journal of Solids and Structures . 2007,第22a23期

机译：层压复合板和加劲板在轴向压缩下屈曲后抗压强度的可靠性评估
4. Buckling Behavior of Composite Laminated Stiffened Panels Under Combined Shear and Axial Compression [C] . H. Abramovich, T. Weller, C. Bisagni 46th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics amp; Materials Conference ; 13th AIAA/ASME/AHS Adaptive Structures Conference ; 7th AIAA Non-Deterministic Approaches Forum ; 6th AIAA Gossamer Spacecraft Forum ; 1st AIAA Multidisciplinary Design Optimization Specialist Conference . 2005

机译：复合材料层合加筋板在剪切和轴向压缩作用下的屈曲行为
5. Buckling and postbuckling analysis of stiffened composite panels in axial compression. [D] . Park, Oung. 1999

机译：加筋复合板在轴向压缩下的屈曲和屈曲后分析。
6. Experimental and Numerical Analyses on the Buckling Characteristics of Woven Flax/Epoxy Laminated Composite Plate under Axial Compression [O] . Venkatachalam Gopalan, Vimalanand Suthenthiraveerappa, Jefferson Stanley David, 2021

机译：轴压下纺织亚麻/环氧树脂层压复合板屈曲特性的实验性和数值分析
7. Buckling and postbuckling behavior of laminated composite stringer stiffened curved panels under axial compression: Experiments and design guidelines [O] . Haim Abramovich, Tanchum Weller 2009

机译：轴压复合纵梁加强弯曲板在轴向压缩下屈曲和出现的行为：实验与设计指南
8. Buckling Loads of Stiffened Panels Subjected to Combined Longitudinal Compression and Shear:Results Obtained with Pasco, Eal,and Stags Computer Programs. [R] . stroud, w. j. greene, w. h. 1984

机译：通过组合纵向压缩和剪切进行加筋板的屈曲载荷：使用pasco，Eal和stags计算机程序获得的结果。

Buckling Behavior of Composite Laminated Stiffened Panels Under Combined Shear-Axial Compression

摘要

著录项

相似文献

相关主题

期刊订阅