...
首页> 外文期刊>Journal of Aircraft >Behavior of Detached-Eddy Simulations for Mild Airfoil Trailing-Edge Separation
【24h】

Behavior of Detached-Eddy Simulations for Mild Airfoil Trailing-Edge Separation

机译:轻度翼型后缘分离的分离涡模拟行为

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

The flow around the A-airfoil at the maximum lift condition (α = 13.3°) with a chord Reynolds number of 2 × 10~6 is simulated using unsteady Reynolds-averaged Navier-Stokes solution, detached-eddy simulation, and delay ed-detached eddy simulation. This case features a relatively thick boundary layer with a mild trailing-edge separation. Detailed comparisons of the modeled Reynolds stresses are carried out with the available experimental data at different locations on the suction side of the airfoil and in the wake region. The impact of the delayed switching on modeled Reynolds stresses from delayed-detached-eddy simulation as compared with the original detached-eddy simulation is studied. On the suction side of the airfoil, the modeled turbulent Reynolds stresses computed through the detached-eddy simulation are generally lower than the unsteady Reynolds-averaged Navier-Stokes solutions, whereas the delayed-detached-eddy simulation gives comparable values with the unsteady Reynolds-averaged Navier-Stokes solutions results. None of them give consistent comparison with the experimental Reynolds stresses. It is observed that for the cases with the mild separation, the original detached-eddy simulation may perform better than the delayed-detached-eddy simulation, due to its relatively lower turbulent dissipation levels. The detached-eddy simulation Reynolds stresses in the wake region show better results, in comparison with the experimental data.
机译:使用非稳态雷诺平均Navier-Stokes解,分离涡流仿真和延迟ed-ed方法,模拟了最大升程条件(α= 13.3°)且弦索雷诺数为2×10〜6的A型机翼周围的流动。分离涡模拟。这种情况的特点是边界层相对较厚,后沿间隔较缓。在翼型吸入侧和尾流区域的不同位置,使用可用的实验数据对建模的雷诺应力进行了详细的比较。与原始的分离涡模拟相比,研究了延迟切换对延迟分离涡模拟对雷诺应力建模的影响。在机翼的吸入侧,通过分离涡模拟计算出的模型湍流雷诺应力通常低于非稳定的雷诺平均Navier-Stokes解,而延迟的分离涡模拟给出的值与非稳定的雷诺应力相当。 Navier-Stokes解决方案的平均结果。他们都没有与雷诺实验应力进行一致的比较。可以看出,对于轻度分离的情况,原始的分离涡模拟可能比延迟分离涡模拟要好,因为它的湍流耗散水平较低。与实验数据相比,尾流区的分离涡模拟雷诺应力表现出更好的结果。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号