首页> 外文期刊>ISIJ international >Interaction between Iron Oxides and Olivine in Magnetite Pellets during Reduction to Fe_(met) at Temperatures of 1 000-1 300℃
【24h】

Interaction between Iron Oxides and Olivine in Magnetite Pellets during Reduction to Fe_(met) at Temperatures of 1 000-1 300℃

机译:在1000-1 300℃温度下磁铁矿中氧化铁与橄榄石在还原成Fe_(met)时的相互作用

获取原文
获取原文并翻译 | 示例
       

摘要

The addition of MgO to iron ore pellets is known to beneficially influences many high temperature reduction properties such as reducibility and swelling. When the pellet is metallized, MgO dissolved in the wustite concentrates in the unmetallized part, which is why MgO-levels much higher than the average concentration could be expected locally. In this work the impact of the elevated MgO-content on the reduction at 1 000-1 300℃ was studied by SEM-EDS. The MgO content in the pellet was also varied by additions of a), highly reactive olivine b) unreactive olivine c) combined addition of reactive olivine and fine quartzite and d) combined addition of unreactive olivine and fine quartzite. Two cases of metallization were observed 1) a gradual reduction front with only moderate magnesium levels and 2) a sharp reduction front with strongly elevated magnesium levels before the metal front. The samples with added quartzite reduced a little better at 1 100℃, compared to those with only olivine, but apart from that, reduction was not affected much by the additives in the range 1 000-1 200℃. The greatest difference in reduction degree appeared at 1 300℃ where a metal skin formed in most samples, hindering further reduction. At this temperature, the sample with addition of only reactive olivine had superior reducibility due to a porous morphology of the iron being mantained throughout the experiment.
机译:已知在铁矿石球团中添加MgO有益地影响许多高温还原性能,例如还原性和溶胀性。当将球团金属化时,溶解在钙铁矿中的MgO会浓缩在未金属化的部分中,这就是为什么可以在本地预期MgO含量远高于平均浓度的原因。在这项工作中,通过SEM-EDS研究了MgO含量升高对1 000-1 300℃还原反应的影响。颗粒中MgO的含量也因添加a)高反应性橄榄石b)不反应性橄榄石c)结合添加反应性橄榄石和细石英岩和d)结合添加不反应性橄榄石和细石英岩而变化。观察到两个金属化的情况:1)逐渐还原的锋线,只有适度的镁含量; 2)急剧的还原锋线,其镁含量在金属锋线之前强烈升高。与仅添加橄榄石的样品相比,添加石英岩的样品在1100℃时的还原效果要好一些,但除此之外,在1 000-1 200℃范围内的添加剂对还原的影响不大。还原度的最大差异出现在1300℃,大多数样品中形成了金属皮,阻碍了进一步还原。在此温度下,仅添加反应性橄榄石的样品具有优异的还原性,这是因为在整个实验过程中都保持了铁的多孔形态。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号