Reduction Disintegration Behavior of Lump Ore in COREX Shaft Furnace

摘要

The heavy disintegration of lump ores would produce plenty of small particles in COREX shaft furnace, which would decrease the gas permeability and productivity of the shaft furnace, thus the proportion of lump ores in the burden of COREX shaft furnace is limited to a low level. In this work, the reduction disintegration behavior of lump ore samples was studied by simulating the reduction process of COREX shaft furnace. The influence of temperature, reduction time and gas composition on the reduction disintegration index (RDI_(6.3)) of lump ore samples were also evaluated. The results showed that the disintegration behavior of lump ores in COREX shaft furnace could be generally divided into three steps and the disintegration mainly occurred in the second step, which was in the temperature zone from 450℃ to 650℃ with low reduction degree. Meanwhile, the RDI_(-6.3) of lump ore samples all presented the tendency of "inverted V-shape" in the temperature range from 450℃ to 650℃ under different reduction time. However, the mutual promotion of reduction reaction and carbon deposition reaction (CDR) was attributed to the main reason for the heavy disintegration of lump ores in COREX shaft furnace. In addition, increasing H_2 concentration in reducing gas and rapid reducing at higher temperature would decrease the disintegration degree of lump ores in COREX shaft furnace.