Autonomous power system for island or grid-connected wind turbines in distributed generation

摘要

Modern power generation systems for wind turbines are often based on the rotor fed slip-ring machines. Power electronics converter provides the slip power, and also the reactive power for excitation of the generator during standalone operation. This way the isolated load can be supplied even if the grid has failed. Stator voltage in an autonomous operation is controlled using vectorial phase locked loop (PLL) structure; therefore the information about mechanical speed or angular position of the rotor is eliminated from the control method. The second PLL is also used for synchronization of the generated voltage with the grid voltage. Voltages synchronization is necessary for soft connection and protection of the supplied load from the rapid change of the supply voltage phase. The grid-connected doubly fed induction generator (DFIG) can be useful after grid fau however, the mains outage detection methods are necessary for fast disconnection after grid failures.