...
首页> 外文期刊>International Review of Civil Engineering >Non-Prismatic Model for Buckling Problem of Column with Single Transverse Crack Under Eccentric Load
【24h】

Non-Prismatic Model for Buckling Problem of Column with Single Transverse Crack Under Eccentric Load

机译:偏心荷载作用下单横裂纹圆柱屈曲问题的非棱镜模型

获取原文
获取原文并翻译 | 示例
           

摘要

This paper introduces the non-prismatic model for solving the buckling problem of eccentric loaded pined ends column with single transverse crack. The Euler's governing differential equation of column buckling was used. Rice and Levy's rotational spring model was inserted to model the transverse crack effect. The relation between relative crack length and non-prismatic model depths ratio for columns with different cross sections and different length was obtained. Quartic equation was derived, using the fitting technique, to represent the relation between relative crack length and the non-prismatic model depths ratio. The transverse deflections from the proposed model and from the softening rotational model were compared and gave good agreement.
机译:本文介绍了一种非棱柱模型,用于解决带有单个横向裂缝的偏心受压固定端柱的屈曲问题。使用了圆柱屈曲的欧拉控制微分方程。插入Rice and Levy的旋转弹簧模型来模拟横向裂纹效应。得到了不同截面,不同长度的柱的相对裂纹长度与非棱柱模型深度比之间的关系。使用拟合技术推导了四次方程,以表示相对裂纹长度与非棱柱模型深度比之间的关系。比较了所提出的模型和软化旋转模型的横向挠度,并取得了良好的一致性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号