Uncertainties in a carbon footprint model for detergents; quantifying the confidence in a comparative result

摘要

Background, aim, and scope A new trend driven by climate change concerns is the interest to label consumer products with a carbon footprint (CF) number. Here, we present a study that examines the uncertainty in the estimated CFs of a liquid and a compact powder detergent and how the uncertainty varies with the type of comparison one wishes to make.rnMaterials and methods A simplified CF model for detergents, encompassing all life cycle stages, has been used for the calculation of CFs. The CFs for the two detergents were compared under three different cases: (1) a situation where most of life cycle assessment (LCA) system is similar, (2) a situation where the LCA background systems may be different but certain choices with regard to system boundaries are standardized, and (3) a situation where the LCA background system, choices of system boundaries, and foreground system may also be different. Uncertainty in the CFs was calculated for each of the three comparison situations using a stepwise sensitivity/uncertainty analysis approach.rnResults The stepwise approach makes it possible to obtain reliable uncertainty estimates without the need to have very good uncertainty descriptions for every input parameter. Only a few input parameters were found to drive the uncertainty of the CF values. For case 1, the uncertainties in the difference between the CF of the ultraliquid and compact powder products are very small. The CF of compact powder is always larger than that of the ultraliquid product. In case 3, the uncertainties become much larger, such that in 23% of the cases, a CF comparison would wrongly indicate that the compact powder product has a lower CF than the ultraliquid product. Case 2 falls between the extremes of cases 1 and 3.rnDiscussion One of the challenges of developing user-friendly CF methods based on the ISO 14040 framework is to ensure a high level of comparability of CF values, such that misleading or oversimplified conclusions can be avoided. Our analysis shows how the uncertainty margins around the calculation of a CF for a set of given products will broaden as the assessment moves from an "internal" comparison to a comparison with data from third parties where there is no specific information how these data have been obtained. CF calculations based on internal comparisons can lead to very clear distinctions between products and illustrate the utility of a CF tool to optimize the environmental performance of products using difference analysis.rnConclusions CF calculations for products can only provide a fair comparison if the LCA background system used for the two products is the same and exactly the same choices in the foreground system are made. In practice, this would require consultation and agreement on specific product category rules.rnRecommendations and outlook Simplification is needed for a wider adoption of uncertainty analysis in CF and LCA. This article introduces some first steps towards such simplification, but more work is needed both on the theoretical and practical aspects of simplified uncertainty analyses.