Regional carbon footprint analysis of dairy feeds for milk production in the USA

摘要

Purpose A greenhouse gas emissions analysis (carbon footprint) was conducted for cultivation, harvesting, and production of common dairy feeds used for the production of dairy milk in the USA. The goal was to determine the carbon footprint (grams CO_2 equivalents (gCO_2e)/kg of dry feed) in the USA on a regional basis, identify key inputs, and make recommendations for emissions reduction. Methods Commonly used dairy feeds in the USA, such as soybeans, alfalfa, corn, and others, were identified based on a recent literature review and information from dairy farm surveys. The following input data for the cultivation and harvesting of dairy feeds were collected for five US regions: crop production data, energy input, soil amendments, and crop protection chemicals. Life cycle inventory input data were mainly collected from the US Department of Agriculture National Agricultural Statistical Service on a state-by-state basis as well as from state extension services forage crop budget estimates. In addition to consulting other life cycle assessment studies and published articles and reports, this cradle-to-farm gate carbon footprint analysis was conducted using the Ecoinvent™ unit processes in SimaPro version 7.1© (PRe Consultants 2009). Results The final carbon footprint results (gCO_2e/kg of dry dairy feed) varied regionally depending on a number of factors such as lime and fertilizer application rates. The average national US carbon footprint results of the main feeds were: corn grain (390), corn silage (200), dried distillers grains with solubles (910 dry mill, 670 wet mill), oats (850), soybeans (390), soybean meal (410), winter wheat (430), alfalfa hay (170), and forage mix (160). Conclusions and recommendations The southeast dairy region generally showed a relatively high level of carbon footprint for most feeds, and this is attributable to the higher application rates of both synthetic fertilizers and lime. The highest contributor to carbon footprint for most regions (apart from soybeans and soybean meal) was due to the application of inorganic nitrogen fertilizer. Efficient transfer of knowledge to farmers with regards to fertilizer best management practices such as precision application of farm nutrients may contribute significantly to reducing regional crop carbon footprints.