首页> 外文期刊>International journal of hydrogen energy >Experimental formula for estimating porosity in a metal hydride packed bed
【24h】

Experimental formula for estimating porosity in a metal hydride packed bed

机译:估算金属氢化物填充床中孔隙率的实验公式

获取原文
获取原文并翻译 | 示例
       

摘要

An experimental formula for estimating porosity in a metal hydride packed bed is pre-sented. The formula was developed by direct observation of the volume changes of a metal hydride packed bed under free expansion in a vessel. The experimental results showed that the cycles of expansion and contraction were repeated at large porosities above 60% after a rapid state change caused by early particle breakup. The formula for porosity was expressed as a function of the reacted fraction and as a function of the cycle number. The function formula of the reacted fraction can be used to compute different values of porosity for expansion by absorption and for contraction by desorption. The coefficients assuming 100% hydrogen storage based on the experiments with LaNi5 were an expansion ratio of 16.7% and a contraction ratio of 8.4%, on average. This experimental porosity formula is useful for effective thermal conductivity calculations and for numerical simu-lations of metal hydride packed bed behavior.
机译:提出了用于估计金属氢化物填充床中孔隙率的实验公式。通过直接观察在容器中自由膨胀下的金属氢化物填充床的体积变化来开发公式。实验结果表明,在由早期颗粒破裂引起的快速状态变化之后,在大于60%的大孔隙率下重复了膨胀和收缩的循环。孔隙率的公式表示为反应馏分的函数和循环数的函数。反应馏分的函数公式可用于计算不同的孔隙率值,以通过吸收进行膨胀,并通过解吸进行收缩。根据LaNi5的实验,假设储氢100%的系数平均为16.7%的膨胀率和8.4%的收缩率。该实验孔隙率公式可用于有效的热导率计算和金属氢化物填充床行为的数值模拟。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号