Improved resistance to hydrogen embrittlement of friction stir welded high carbon steel plates

摘要

The hydrogen embrittlement of the friction stir welded high carbon steel plates was evaluated by the cathodic hydrogen charging method. The welding was performed below Ac1 transformation point and therefore the stir zone of the welds contained refined ferrite matrix distributed with cementite particles. After hydrogen charging for 4 h, large quantities of irreversible dome-shaped blisters were formed on the surface of the base metal. However, no blisters were observed in the stir zone even after charging for 16 h. In addition, hydrogen-induced internal cracks were formed throughout the thickness of the base metal. But the development of the internal cracks in the base metal was restricted when getting close to the stir zone. The hydrogen charged stir zone showed less reduction of ductility than the base metal during tensile testing, which reveals that the friction stir welded steel joints showed higher resistance to hydrogen embrittelment than base metal. Copyright (C) 2015, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.