首页> 外文期刊>International journal of hydrogen energy >Perovskite materials for hydrogen production by thermochemical water splitting
【24h】

Perovskite materials for hydrogen production by thermochemical water splitting

机译:钙钛矿材料,用于热化学水分解制氢

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

The performance of perovskites as redox materials for solar thermochemical hydrogen production and energy storage have been studied theoretically by several authors but there are only a few experimental studies about them. In this work, an evaluation of commercial perovskite materials La1-xSrxMeO3 (Me = Mn, Co and Fe) for thermochemical water splitting is presented. The studied perovskites showed suitable redox properties for energy storage in thermogravimetric analysis (TGA) in presence of air, although only the Co-perovskite material (LSC) exhibited cyclability capacity. Experiments of thermochemical water splitting revealed hydrogen production, with increasing yields for Mn-, Fe- and Co-substituted perovskites, respectively. La/Sr ratio in the range of x = 0.2 to 0.4 showed only a slight influence on the amount of hydrogen produced and on the temperature required for the processes. On the other hand, metal substitution type seems to be a critical factor for the thermal reduction of these perovskites, taking place at temperatures above 1000 degrees C for the Mn-perovskite, 800 degrees C for Co-material and 900 degrees C for Fe-material. These results experimentally demonstrate the suitability of solar hydrogen production based on La1-xSrxMeO3 thermochemical cycles. Moreover, the required temperatures for hydrogen production (230 degrees C) are lower than those commonly reported in literature for "pure" MenOy oxide cycles (500 degrees C), making perovskite-based cycles a promising alternative. The cyclability studies with the LSC showed a slight decrease in the hydrogen production, derived from the segregation of metallic Co during the thermochemical cycle. This study confirmed the LSC perovskite as a promising material for hydrogen production by solar-driven thermochemical water splitting, although a further insight in the optimization of the operation under consecutive cycles is necessary in order to assess the material as alternative as redox material for a full-scale application. (C) 2016 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.
机译:几位作者从理论上研究了钙钛矿作为氧化还原材料用于太阳能热化学制氢和储能的性能,但是仅有很少的实验研究。在这项工作中,提出了用于热化学水分解的商用钙钛矿材料La1-xSrxMeO3(Me = Mn,Co和Fe)的评估。所研究的钙钛矿表现出合适的氧化还原性质,适合在空气存在下通过热重分析(TGA)进行能量存储,尽管只有钙钙钛矿材料(LSC)具有循环能力。热化学水分解的实验揭示了氢气的产生,分别增加了Mn,Fe和Co取代钙钛矿的产率。 La / Sr比在x = 0.2到0.4的范围内,仅显示出对氢气产生量和过程所需温度的轻微影响。另一方面,金属取代类型似乎是这些钙钛矿热还原的关键因素,Mn-钙钛矿在1000摄氏度以上,Co-材料在800摄氏度以上,Fe-在900摄氏度以上发生。材料。这些结果实验证明了基于La1-xSrxMeO3热化学循环的太阳能制氢的适用性。此外,制氢所需的温度(230摄氏度)比文献中通常报道的“纯” MenOy氧化物循环(500摄氏度)要低,这使得基于钙钛矿的循环成为有前途的替代方法。用LSC进行的可循环性研究表明,由于热化学循环过程中金属Co的偏析,氢的产生量略有下降。这项研究证实了LSC钙钛矿是通过太阳能驱动的热化学水分解生产氢气的有前途的材料,尽管在连续循环下优​​化操作的进一步洞察是必要的,以便评估该材料是否可以作为氧化还原材料的替代品。规模的应用程序。 (C)2016氢能出版物有限公司。由Elsevier Ltd.出版。保留所有权利。

著录项

  • 来源
    《International journal of hydrogen energy》 |2016年第42期|19329-19338|共10页
  • 作者单位

    Rey Juan Carlos Univ, ESCET, Chem & Environm Engn Grp, Tulipan S-N, Mostoles 28933, Spain;

    Rey Juan Carlos Univ, ESCET, Chem & Environm Engn Grp, Tulipan S-N, Mostoles 28933, Spain;

    Rey Juan Carlos Univ, ESCET, Chem & Environm Engn Grp, Tulipan S-N, Mostoles 28933, Spain;

    Rey Juan Carlos Univ, ESCET, Chem & Environm Engn Grp, Tulipan S-N, Mostoles 28933, Spain;

    Rey Juan Carlos Univ, ESCET, Chem & Environm Engn Grp, Tulipan S-N, Mostoles 28933, Spain;

    Rey Juan Carlos Univ, ESCET, Chem & Environm Engn Grp, Tulipan S-N, Mostoles 28933, Spain;

  • 收录信息 美国《科学引文索引》(SCI);美国《工程索引》(EI);美国《生物学医学文摘》(MEDLINE);
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

    Perovskites; Solar hydrogen; Thermochemical cycles; Water splitting;

    机译:钙钛矿;太阳能;热化学循环;水分解;

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号