An alternative route to produce easily activated nanocrystalline TiFe powder

摘要

In this paper, an alternative process route to produce active nanocrystalline TiFe compound was investigated. First, TiH2and Fe powders were dry co-milled in a planetary ball mill for 5–40 h. TiH2was selected as precursor powder, instead of Ti powder, due its fragility, which has proved to be beneficial to decrease powders adherence on milling tools. In terms of loose powder mass, milling yields ranged from 90 to 95 wt.%. Next, milled powders were post-heated at 873 K under dynamic high-vacuum for TiFe synthesis reaction. First hydrogen absorption was verifiedin situduring the cooling process of samples (until the room temperature), being the amount of hydrogen absorbed and desorbed by this samples measured by automated Sievert's apparatus, under constant hydrogen flow rate of 9 cm3. min-1(dynamic measurements). Besides to allowing the first absorptionin situ, the investigated process route also allowed the production of the non-stoichiometric TiFe compound (rich in Ti) in samples milled for shorter times (5 and 10 h), both characteristics associated with maintaining the mechanical compound activity. Each sample absorbed hydrogen at 2 MPa during the cooling process, requiring no additional thermal activation cycles, since the samples milled for shorter times (mainly for 10 h) could absorb hydrogen for the first time more easily. However, the samples milled for longer times (25 and 40 h) shown better results in terms of reversible and storage capacities (0.73 and 0.94 wt.%, respectively).