首页> 外文期刊>International journal of hydrogen energy >The potential of metal hydrides paired with compressed hydrogen as thermal energy storage for concentrating solar power plants
【24h】

The potential of metal hydrides paired with compressed hydrogen as thermal energy storage for concentrating solar power plants

机译:金属氢化物与压缩氢气配对作为聚光太阳能发电厂的热能储存的潜力

获取原文
获取原文并翻译 | 示例
       

摘要

Concentrating solar power (CSP) plants require thermal energy storage (TES) systems to produce electricity during the night and periods of cloud cover. The high energy density of high-temperature metal hydrides (HTMHs) compared to state-of-the-art two-tank molten salt systems has recently promoted their investigation as TES systems. A common challenge associated with high-temperature metal hydride thermal energy storage systems (HTMH TES systems) is storing the hydrogen gas until it is required by the HTMH to generate heat. Low-temperature metal hydrides can be used to store the hydrogen but can comprise a significant proportion of the overall system cost and they also require thermal management, which increases the engineering complexity. In this work, the potential of using a hydrogen compressor and large-scale underground hydrogen gas storage using either salt caverns or lined rock caverns has been assessed for a number of magnesium- and sodium-based hydrides: MgH2, Mg2FeH6, NaMgH3, NaMgH2F and NaH. Previous work has assumed that the sensible heat of the hydrogen released from the HTMH would be stored in a small, inexpensive regenerative material system. However, we show that storing the sensible heat of the hydrogen released would add between US$3.6 and US$7.5/kWh(th) to the total system cost for HTMHs operating at 565 degrees C. If the sensible heat of released hydrogen is instead exploited to perform work then there is a flow-on cost reduction for each component of the system. The HTMHs combined with underground hydrogen storage all have specific installed costs that range between US$13.7 and US$26.7/kWh(th) which is less than that for current state-of-the-art molten salt heat storage. Systems based on the HTMHs Mg2FeH6 or NaH have the most near term and long term potential to meet SunShot cost targets for CSP thermal energy storage. Increasing the operating temperature and hydrogen equilibrium pressure of the HTMH is the most effective means to reduce costs further. (C) 2019 Published by Elsevier Ltd on behalf of Hydrogen Energy Publications LLC.
机译:集中式太阳能发电厂(CSP)需要热能存储(TES)系统,以便在夜间和云层覆盖期间发电。与最新的两罐熔融盐系统相比,高温金属氢化物(HTMH)的高能量密度最近推动了它们作为TES系统的研究。与高温金属氢化物热能存储系统(HTMH TES系统)相关的常见挑战是存储氢气,直到HTMH要求产生热量为止。低温金属氢化物可用于存储氢,但可能占整个系统成本的很大一部分,而且它们还需要进行热管理,从而增加了工程复杂性。在这项工作中,已评估了使用镁盐和钠盐氢化物(MgH2,Mg2FeH6,NaMgH3,NaMgH2F和NaH。先前的工作已假定从HTMH释放出的氢气的显热将存储在一个小型,廉价的再生材料系统中。但是,我们表明,存储释放出的氢的显热将使在565摄氏度下运行的HTMH的系统总成本增加3.6至7.5美元/ kWh(th)。如果将释放出的氢的显热用于执行工作,则系统的每个组件的生产成本都会降低。 HTMH与地下储氢相结合,其特定的安装成本在13.7美元至26.7美元/ kWh(th)之间,这比当前最先进的熔融盐储热装置的成本低。基于HTMH的Mg2FeH6或NaH的系统具有近期和长期的潜力,可以满足SunShot CSP热能存储的成本目标。提高HTMH的工作温度和氢平衡压力是进一步降低成本的最有效方法。 (C)2019由Elsevier Ltd代表Hydrogen Energy Publications LLC发布。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号