首页> 外文期刊>International Journal of Heat and Mass Transfer >On numerical modelling of conjugate turbulent natural convection and radiation in a differentially heated cavity
【24h】

On numerical modelling of conjugate turbulent natural convection and radiation in a differentially heated cavity

机译:差热腔中共轭湍流自然对流和辐射的数值模拟

获取原文
获取原文并翻译 | 示例
       

摘要

Turbulent natural convection with and without radiation transfer in two-dimensional (2D) and three-dimensional (3D) air-filled differentially heated cavities is numerically investigated using various RANS (Reynolds Averaged Navier-Stokes) turbulence models and the Discrete Ordinates radiation model. Five different two-equation eddy-viscosity models including the standard κ-ε model, the renormalization group (RNG) κ-ε model, the realisable k-e model, the standard κ-ω model and the shear-stress transport (SST) κ-ω model are selected for comparison. Qualitative and quantitative data are presented to demonstrate the effects of three-dimensionality, radiation transfer and the thermal boundary conditions on the horizontal surfaces on the numerical solution of the convective flow in the cavity. The present numerical results are compared against published experimental and direct numerical simulation data. It is found that the predicted thermal stratification in the interior of the cavity is improved when the simulation is extended from 2D to 3D and when the effect of radiation transfer is accounted for. The discrepancy with regard to the interior stratification between the experiment and numerical simulation is mainly caused by the negligence of radiation transfer. The thermal boundary conditions on the horizontal surfaces also have a significant impact on the numerical solution, especially when the radiation transfer is not accounted for. Further, the present results show that all the RANS models are capable of capturing the main features of the flow and the overall performance of these turbulence models in terms of predicting time-averaged quantities is acceptable. It is found that the variation of the numerical results obtained with the three κ-ε models is very small, whereas the discrepancy between the two κ-ω models is significant. The SST κ-ω model has the best overall performance and the standard κ-ω model has the worst overall performance.
机译:使用各种RANS(雷诺平均Navier-Stokes)湍流模型和离散Ordinates辐射模型对在二维(2D)和三维(3D)充气差异加热腔中具有和不具有辐射传递的湍流自然对流进行了数值研究。五个不同的两方程涡流粘度模型,包括标准κ-ε模型,重新归一化组(RNG)κ-ε模型,可实现的ke模型,标准κ-ω模型和剪切应力传递(SST)κ-选择ω模型进行比较。给出了定性和定量的数据,以证明三维,辐射传输和水平面上的热边界条件对空腔中对流流动数值解的影响。将当前数值结果与已发布的实验和直接数值模拟数据进行比较。发现当将模拟从2D扩展到3D并考虑辐射传输的影响时,空腔内部的预测热分层会得到改善。实验与数值模拟在内部分层方面的差异主要是由于辐射传输的疏忽造成的。水平表面的热边界条件也对数值解产生重大影响,尤其是在不考虑辐射传递的情况下。此外,目前的结果表明,所有的RANS模型都能够捕获流的主要特征,并且在预测时间平均量方面,这些湍流模型的整体性能是可以接受的。发现使用三个κ-ε模型获得的数值结果的变化很小,而两个κ-ω模型之间的差异却很明显。 SSTκ-ω模型的整体性能最佳,标准κ-ω模型的整体性能最差。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号