首页> 外文期刊>International Journal of Heat and Mass Transfer >Turbulent convective heat transfer of silica oxide nanofluid through corrugated channels: An experimental and numerical study
【24h】

Turbulent convective heat transfer of silica oxide nanofluid through corrugated channels: An experimental and numerical study

机译:二氧化硅纳米流体通过波纹通道的湍流对流换热:实验和数值研究

获取原文
获取原文并翻译 | 示例
           

摘要

Combining a corrugated surface and nanofluids technologies have caused attracted significant interest to develop the ability of compact heat exchangers in order to produce more efficient and reliable thermal systems. In this paper, the forced convective turbulent flow of SiO2-water nanofluid through different corrugated channels is studied numerically and experimentally. All studies are performed for the straight channel (SC) and different two corrugated channels, namely semicircle corrugated channel (SCC) and trapezoidal corrugated channel (TCC) over Reynolds number ranges of 10000-30000. SiO2 nanoparticles suspended in distilled water with two particle volume fractions (1% and 2%) were successfully prepared and tested. Numerically, the discussion and analysis on heat transfer and flow characteristics which including velocity, isotherms contours, turbulence kinetic energy, vortices magnitude are provided. The results show that the corrugation profile has a significant impact on heat transfer enhancement compared to the straight profile. Also, silica nanofluid shows a better heat transfer in comparison with the base fluid. The new style of trapezoidal corrugated channel offers the best heat transfer enhancement. This indicated that this geometry with silica nanofluid can improve the heat transfer significantly with a reasonable increase in pressure drop. The results for the numerical outcomes and experimental data are in good agreement. (C) 2019 Elsevier Ltd. All rights reserved.
机译:波纹表面和纳米流体技术的结合引起了人们极大的兴趣,以开发紧凑型热交换器的能力,以生产更有效和可靠的热力系统。本文通过数值和实验研究了SiO2-水纳米流体通过不同波纹通道的强迫对流湍流。所有研究均针对雷诺数为10000-30000的直通道(SC)和不同的两个波纹通道,即半圆形波纹通道(SCC)和梯形波纹通道(TCC)。成功制备并测试了悬浮在蒸馏水中的SiO2纳米颗粒,该颗粒具有两个颗粒体积分数(分别为1%和2%)。在数值上,讨论和分析了包括速度,等温线轮廓,湍流动能,涡度大小在内的传热和流动特性。结果表明,与直线型材相比,波纹型材对传热的增强有显着影响。而且,与基础流体相比,二氧化硅纳米流体显示出更好的热传递。新型梯形波纹通道可提供最佳的传热效果。这表明这种具有二氧化硅纳米流体的几何形状可以通过合理地增加压降来显着改善传热。数值结果与实验数据吻合良好。 (C)2019 Elsevier Ltd.保留所有权利。

著录项

  • 来源
    《International Journal of Heat and Mass Transfer》 |2019年第12期|118806.1-118806.15|共15页
  • 作者

  • 作者单位

    Univ Tun Hussein Onn Malaysia Fac Mech & Mfg Engn Batu Pahat 86400 Johor Malaysia|Univ Babylon Coll Engn Dept Mech Engn Babylon Iraq;

    Univ Tun Hussein Onn Malaysia Fac Mech & Mfg Engn Batu Pahat 86400 Johor Malaysia;

    Univ Kebargsaan Malaysia Solar Energy Reasearch Inst Bangi 43600 Selangor Malaysia;

    Univ Tenaga Nas Ctr Adv Computat Engn Selangor 43000 Malaysia;

  • 收录信息 美国《科学引文索引》(SCI);美国《工程索引》(EI);
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

    Heat transfer enhancement; Silica; Pressure drop; Corrugated channel; Nanduids;

    机译:传热增强;二氧化硅压力下降;波纹通道;南迪人;

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号