首页> 外文期刊>International Journal of Heat and Mass Transfer >Noncontact direct temperature and concentration profiles measurement of soot and metal-oxide nanoparticles in optically thin/thick nanofluid fuel flames
【24h】

Noncontact direct temperature and concentration profiles measurement of soot and metal-oxide nanoparticles in optically thin/thick nanofluid fuel flames

机译:光学稀/厚纳米流体燃料火焰中烟灰和金属氧化物纳米颗粒的非接触式直接温度和浓度分布测量

获取原文
获取原文并翻译 | 示例
       

摘要

A novel inverse reconstruction model was presented to simultaneously estimate temperature and concentration distributions of soot and metal-oxide nanoparticles in optically thin/thick nanofluid fuel flames from the knowledge of flame emission radiation intensities received by a CCD camera. The flame self-absorption effect was considered and the additional help with thermophoretic sampling particle diagnostics (TSPD) technique in the previous model was no longer needed. The monochromatic radiation intensity at the central wavelength of B channel was used to search the volume fraction ratio of metal oxide nanoparticles to soot, and those at the central wavelengths of R, G channels were used to calculate the unknown parameters profiles. Hybrid algorithms including one-dimensional searching, least-square QR decomposition (LSQR) and iterative algorithms were introduced to deal with the inverse problem. The radiation intensities were simulated based on the line-of-sight method, which were regarded as the input values in the inverse problem. The effects of input metal-oxide nanoparticles concentration fields, optical thicknesses and measurement errors on the reconstruction accuracy were discussed in details. Accurate reconstructed results can be obtained from the ideal radiation intensity even on the conditions of the extremely low distribution of metal-oxide nanoparticles concentration and the large optical thickness. The temperature and soot concentration fields can be successfully retrieved even with the noisy data, while the reconstruction of metal-oxide nanoparticles concentration profile with the random distribution at the locations close to the flame center was susceptible to the measurement error. However, in the flame with the continuous distribution in the metal-oxide nanoparticles concentration, the reconstructed profiles were still satisfying with the high level of noise. (C) 2019 Elsevier Ltd. All rights reserved.
机译:提出了一种新颖的逆重构模型,可根据CCD相机接收到的火焰发射辐射强度,同时估算光学稀薄/厚纳米流体燃料火焰中烟灰和金属氧化物纳米颗粒的温度和浓度分布。考虑了火焰的自吸收作用,并且不再需要以前模型中的热泳采样粒子诊断(TSPD)技术的额外帮助。 B通道中心波长的单色辐射强度用于搜索金属氧化物纳米粒子与烟灰的体积分数比,R,G通道中心波长的单色辐射强度用于计算未知参数分布。引入了一维搜索,最小二乘QR分解(LSQR)和迭代算法的混合算法来解决逆问题。基于视线法模拟了辐射强度,将其视为反问题中的输入值。详细讨论了输入金属氧化物纳米粒子浓度场,光学厚度和测量误差对重建精度的影响。即使在金属氧化物纳米颗粒浓度分布极低且光学厚度较大的条件下,也可以从理想辐射强度获得准确的重建结果。即使使用嘈杂的数据,也可以成功检索温度和烟can浓度场,而在靠近火焰中心的位置随机分布的金属氧化物纳米粒子浓度分布图的重建容易受到测量误差的影响。但是,在火焰中金属氧化物纳米颗粒浓度连续分布的情况下,重建的轮廓仍然满足高噪声水平。 (C)2019 Elsevier Ltd.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号