Aerodynamic forces and three-dimensional flow structures in the mean wake of a surface-mounted finite-height square prism

摘要

Different flow models have been proposed for the flow around surface-mounted finite-height square prisms, but there is still a lack of consensus about the origin and connection of the streamwise tip vortices with the other elements of the wake. This numerical study was performed to address this gap, in addition to clarifying the relationship of the near-wake structures with the far wake and the near-wall flow, which is associated with the fluid forces. A large-eddy simulation approach was adopted to solve the flow around a surface-mounted finite-height square prism with an aspect ratio of AR = 3 and a Reynolds number Re = 500. The mean drag and normal forces and the bending moment for the prism were quantitatively compared in terms of skin-friction and pressure contributions, and related to the near-wall flow. Both three-dimensional visualizations and planar projections of the time-averaged flow field were used to identify, qualitatively, the main structures of the wake, including the horseshoe vortex, corner vortices and regions of high streamwise vorticity in the upper part of the wake. These features showed the same qualitative behavior as reported in high Reynolds number studies. It was found that some regions of high streamwise vorticity magnitude, like the tip vortices, are associated with the three-dimensional bending of the flow, and the tip vortices did not continuously extend to the free end of the prism. The three-dimensional flow analysis, which integrated different observations of the flow field around surface-mounted finite-height square prisms, also revealed that the mean near-wake structure is composed of two sections of different origin and location of dominance.