...
机译:纤维素和碱性焊剂对X42钢SMAW焊缝的组织,成分和硬度的影响
Laboratory of Metallurgy and Materials Engineering (LMGM), Department of Metallurgy and Materials Engineering, BP 12, Badji Mokhtar University, Annaba - Algeria;
Laboratory of Genie Energetique and Materials, (LGEM) Department of Genie Mechanical BP 145, Mohamed Khider University Biskra - Algeria;
Laboratory of components active and Materials, (LCAM), Larbi Ben Mhidi University Oum el Bouaghi - Algeria;
Laboratory of Metallurgy and Materials Engineering (LMGM), Department of Metallurgy and Materials Engineering, BP 12, Badji Mokhtar University, Annaba - Algeria ,Physico-Chemical Analyzes Research Center (CRAPC) BP 384, Bou-Ismail 42004 Tipaza - Algeria;
Laboratory of Metallurgy and Materials Engineering (LMGM), Department of Metallurgy and Materials Engineering, BP 12, Badji Mokhtar University, Annaba - Algeria;
Steel X42; Cellulosic flux; Basic flux; SMAW welding; Microstructure; Non-metallic Inclusion; Micro-hardness;
机译:焊接后热处理温度对焊接A517-GR.B钢制微观结构和机械性能的影响
机译:焊接沉积顺序对钢框架结构梁柱焊接连接组织和硬度影响的分析研究
机译:焊接沉积顺序对钢框架结构梁对柱焊接连接组织和硬度影响的分析研究
机译:焊接金属微观结构和硬度的变化在改性的9Cr-1MO(P91)钢上浸没电弧焊接过程中的硼三氧化硼。
机译:残余应力,焊趾缺口和焊缝缺陷对焊接钢结构疲劳的影响。
机译:质子辐照对焊接308L双相不锈钢硬度和伏特电位的影响
机译:使用SMAW法测定电流对SS400钢焊接过程中微结构和硬度的影响
机译:焊剂助焊剂对4340钢焊缝金属成分的影响