Evaluation of Pleurotus as Fluid Loss Control Agent in Synthetic Base Mud for Oil and Gas Drilling Operations

摘要

Pleurotus as a fluid loss control additive in synthetic based mud for oil and gas operations was conducted in the laboratory in accordance with API standards using high temperature-high pressure filter press. The effectiveness and compatibility of Pleurotus to synthetic based mud was also evaluated. Its rheological properties were also carried out. Sodium Asphalt Sulfonate was used as a control sample. Synthetic base mud was formulated and the concentrations of 2ppb, 4ppb, 6ppb and 8ppb of Pleurotus were used in four mud formulations with the same materials and in equal concentrations. 4.6ml, 4.0ml, 3.5ml and 3.1ml of fluid loss volumes were obtained respectively. 1mm thick filter cake, with increase in electrical stability was observed. From the laboratory measurement, the optimum effective concentration of Pleurotus to be applied as a fluid loss control agent for fresh non-aqueous mud for field operation is 2ppb which gave the fluid loss volume less than 5ml. The result was compared with the field standard of less than or equal to 5ml fluid loss volume. These results were comparable with control sample and field standard. Also, the thin impermeable filter cake obtained reflects one of the qualities of a good fluid loss control agent. It also showed that Pleurotus contribute very minimal effect on the rheological properties of the synthetic base mud. Improved electrical stability which is the function of emulsion stability confirmed the compatibility property of Pleurotus as fluid loss control additive in the synthetic based mud. The volume of the filtrate improved in geometric progression with the concentrations of the additive applied which summarizes the characteristics of a good fluid loss control agent.